MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
GonzaloOndataInt
 Post subject: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 5:33 
Offline

Joined: May 27th, 2010, 5:11
Posts: 6
Location: Spain
I need to find out the type of WD with PCB code 7016115-003. It's a 2,5" HD with a mini USB integrated at the PCB. Please help me if you know. Thank you.
Top
 Profile  
 
unknown
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 6:14 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Post a clear picture of your PCB.
Top
 Profile  
 
hddguy
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 6:16 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
GonzaloOndataInt wrote:
I need to find out the type of WD with PCB code 7016115-003.


What do you mean 'the type' ?
Top
 Profile  
 
unknown
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 6:19 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
I think he means the drive model ???? :!: :!: :?:
Top
 Profile  
 
GonzaloOndataInt
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 6:58 
Offline

Joined: May 27th, 2010, 5:11
Posts: 6
Location: Spain
Yes the drive model, sorry. The cuestion is the pcb is burned.

Edit: I attach the picture.


Attachments:
P5260021.JPG
P5260021.JPG [ 783.99 KiB | Viewed 8188 times ]
Top
 Profile  
 
unknown
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 10:02 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
I think the drive model would be WDxxxxBMVV-xxA1PS0. But why you need to know the drive model anyway ?
Top
 Profile  
 
GonzaloOndataInt
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 11:16 
Offline

Joined: May 27th, 2010, 5:11
Posts: 6
Location: Spain
I need a exactly donor (Western Digital 2´5 HD) to change the platters. My PCB it´s burned but
not carbonized completely, but the ePROM doesn´t survive. I can read yet a part of the code.

PCB CODE: 2060-701615-003

I don´t know the p/n, firmware or the DCM codes. However, I suspect it may belong an HD of
the Scorpio Blue or Scorpio Black series like:

wD3200BJKT
WD2500BJKT
WD1600BJKT
WD3200BEKT
WD2500BEKT
WD1600BEKT

It has two pairs of heads and two platters and micro-USB connector located at the PCB. It hasn´t SATA neither
IDE connectors.

Please, answer the following questions as soon as posible:

Anybody has a similar HD with micro USB located at the PCB without IDE or SATA connections?

Anybody knows which would micro-USB connector be included at the PCB?

Anybody has seen a notebook with micro-USB connections exclusively to connect the HD´s to the mother board
directly?

Thanks!
Top
 Profile  
 
Alexii
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 11:29 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
i belive WD passport drives used to do that. USB only. Indeed scorpio inside.
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 11:50 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Seen the damage, this drive will be unrecoverable.



Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
unknown
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 13:23 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Quote:
Seen the damage, this drive will be unrecoverable.

I have to agree with you Mr.Dobre.
Top
 Profile  
 
zebong
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 27th, 2010, 17:16 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
post the rest of the pictures.

the plattes

this drive will a challenge to recovery :) or maybe not ;)

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
GonzaloOndataInt
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 28th, 2010, 3:04 
Offline

Joined: May 27th, 2010, 5:11
Posts: 6
Location: Spain
The platters are fine, but I don't know where these are guard. I agree it's a challenge.
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 28th, 2010, 7:01 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Magnetic data will be erased by temperature.
Read about curie-temperature.
No solution possible

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
BlackST
 Post subject: Re: Find out the exactly PCB of a WD
PostPosted: May 28th, 2010, 8:30 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
@dobre,

To me drive is partially to full recoverable but there's a lot of work to do. And it would be a really expensive case.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 52 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group