Hi to all!
Model WD2502ABYS

bads modules.

No acess data.

_________________
Нет ничего невозможного

Fix the modules. Access the data.

_________________
http://www.datasaversllc.com

lol


As Mr.Jono said : fix the modules and access the data.
What's the problem then Mr.Sempre ?

My problem is SA not having experience of WD. these modules a question where can I find them to write them. Or still have some function that I can access the data without having to take these modules equal to write them? how to restore the translator?

MDL: WD250ABYS-23B7A0
DCM: HGRNHV2AAN
DOM: 09 AUG 2008

Thanks!!

_________________
Нет ничего невозможного

What tool(s) do you have? PC3K or SD?

_________________
http://www.datasaversllc.com

Looks like a pc3k report

_________________
You don't have to backup all of your files, just the ones you want to keep.

Tool PC3K

_________________
Нет ничего невозможного

IS MDL: WD250ABYS-18B7A0
DCM:HARNHT2AAN
is modules compatibles?

_________________
Нет ничего невозможного

does PCB is original??

_________________
data recovery service[/b]

I think the first step is to locate a suitable donor drive, or get a set of modules that match the firmware version. This is the hardest step, since there are multiple FW versions among the same WD drive models.

_________________
http://www.datasaversllc.com

My client says yes, but I have my doubts!

_________________
Нет ничего невозможного

please can you tell me what donor would be ideal or near ideal?
PM
Thanks all!

_________________
Нет ничего невозможного

HDD POSSIBLE DONOR

Techno mode key
Techno mode key......................... : Ok

RAM:
Zone allocation table................... : Ok
Cyl Count............................... : 170
SA SPT.................................. : 1311

Head number reading..................... : Ok
Heads number............................ : 2

ROM:
Flash Dir reading....................... : Ok
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 05.8TC
ROM generation.......................... : 05.91C
Link table version...................... : 04.AH.
Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Head map................................ : 0,1

ROM Firmware version.................... : 0005008T
Service area:
SA dir reading.......................... : Ok
SA Copies avalabled..................... : Copy 0,Copy 1

Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set

SA Firmware version..................... : 00050091


HDD BAD

Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED"
SA SPT.................................. : SA SPT determination error - Device Error Detected: "SERVO ERROR CODE BASE SvirADChang"

Head number reading..................... : Ok
Heads number............................ : 2

ROM:
Flash Dir reading....................... : Ok
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 05.54B
ROM generation.......................... : 05.54B
Link table version...................... : 04.47.
Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Head map................................ : 0,1

ROM Firmware version.................... : 00050054
Service area:
SA dir reading.......................... : Unknown error. Code(0)
SA Copies avalabled..................... : NONE

Configuration reading................... : Module 02 not found

SA Firmware version..................... : Module part reading error - Device Error Detected: "Unknown error. Error code: 0101"

PCB HDD BAD IN HDD DONOR

Techno mode key
Techno mode key......................... : Ok

RAM:
Zone allocation table................... : HDDs RAM reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED"
SA SPT.................................. : SA SPT determination error - Device Error Detected: "SERVO ERROR CODE BASE SvirADChang"

Head number reading..................... : Ok
Heads number............................ : 2

ROM:
Flash Dir reading....................... : Ok
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 05.54B
ROM generation.......................... : 05.54B
Link table version...................... : 04.47.
Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Head map................................ : 0,1

ROM Firmware version.................... : 00050054
Service area:
SA dir reading.......................... : Unknown error. Code(0)
SA Copies avalabled..................... : NONE

Configuration reading................... : Module 02 not found

SA Firmware version..................... : Module part reading error - Device Error Detected: "Unknown error. Error code: 0101"

SA structure test

FAIL PCB HDD BAD? AND OR NOT ORIGINAL PCB? THERE IS THE POSSIBILITY THAT WITH THOSE SELLING LOGS?

_________________
Нет ничего невозможного

This post is fast becoming confusing.

First screenshot shows SA structures, but recent post shows no SA available? Why do you think you need donor, what do you plan to do?

This should be a pretty simple recovery with right tools. Some overlays damaged, some other modules may need repair, or HotSwap may allow access to data if done correct.

I can not understand exactly what you are asking here?