Hello,

Do you know if it's exist adapter sata or ide for the HDD Samsung HS212UHE ?
This isn't ZIF connectivity. We havn't find a compatible adapter to SATA or IDE.

Model : HS12UHE
HDD P/N : HS12UHE/A
REV.A

i think its 1.8"

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Yes, the HDD is 1,8'' but the connectivity isn't ZIF but other thing.
Do you know a reference of adapter for it ?

well am looking, it is N3U 1.8"

am searching also for the converter, will let u know when i found something

btw, did u take the HDD from a MAC PC (Apple) i think they are the one who always come with stupid (smart) i dono idea`s?

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

could you please provide some images for the Interface
specially the ribbon

and the pcb if possible

thnx

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

finally, i guess it is ZIF3

check those links on ebay

http://cgi.ebay.com.my/1-8-PATA-ZIF-HDD ... 53dcd99093

http://cgi.ebay.com.my/1-8-Toshiba-PATA ... 53dd097bf4

http://cgi.ebay.com.my/1-8-PATA-ZIF-CE- ... 3ef890c06b

am ordering for me those

good luck

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Thank you for your answer einstein9 but check the number of the pin on my picture and on your ebay auction.
This is not the same. See my new picture. On the left, this is a ZIF adapter to PATA, in the middle, a compatible cable for my HDD and on the right, this is my HDD.

thats why i asked about closer image
so this doesn`t work

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

No other idea ?

my brain is processing looking for alternatives

guess am the only one thinking about this, doesn`t matter, soon or later will come

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

yan1982, can you upload closer very close image of the ribbon i wanna see the pins how many if possible

many thnx

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

Hi
If these are from MacBook air and is the samsung drive these drives are actually a sat drive
You will require a sata to zif adaptor
I am currently trying to source some but have had no luck
They are quite rare these drives which is making it difficult to obtain
I did find an article on how to build an adaptor but don't have the link with me
However if you google the model of the drive, Mac book air and sata adaptor you should find the link
I will try and post it in the next few days
If you make progress please let me know

Hi
We just had one of these nightmare drives.
It's a LIF-connector - not a ZIF - It only has 24 ribbons in the cable. But it’s just a SATA connector wired differently (and some power /ground) … at least that’s what I could get out of google and http://forums.macrumors.com/showthread.php?t=657341
(Been told there exist a small-LIF as well with an even smaller FCC-ribbon).

We haven't been able to find an adapter to SATA - but there is an usb adapter, (thank you to the guys at Data Clinic)
http://www.mydigitaldiscount.com/SPD/runcore-1-8--sata-lif-usb-2-0-hdd-ssd-enclosure--80000D7A-1270043844.jsp

But then again... a usb connection is far from optimal, if there is some kind of damage - guessing you can grab the SATA data stream from within the usb-adapter - if you do find a way... please upload the schematics;)


Best of luck

Michael, PAD-dataservice

_________________
------------
PAD-dataservice
http://www.pad-dataservice.dk

SATA requires 2x TX and 2x RX wires, plus ground.

If you can upload a detailed view of both sides of the PCB, then it should be very easy to identify the signal pairs.

_________________
A backup a day keeps DR away.