View topic - WD Caviar problem: WD1000BB-75CHE0

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD Caviar problem: WD1000BB-75CHE0

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

edsel

Post subject: WD Caviar problem: WD1000BB-75CHE0

Posted: September 21st, 2010, 8:01

Joined: March 12th, 2009, 18:31
Posts: 32
Location: Sweden

I have a WD1000BB-75CHE0 that makes a clicking sound and then slows down and stops.

MHDD gives the following results:

Code:

WDC WD1000BB LBA:0
SN: some rubbish FW: 22.04A CACHE: 8192 Kb
SUPPORTS: MS16 SIZE: 0 Mb

Does not support LBA mode.
MHDD will not work with this device

Has anybody some advice for me?

_________________
Edsel
---------------------------------

Top

hddguy

Post subject: Re: WD Caviar problem: WD1000BB-75CHE0

Posted: September 21st, 2010, 8:04

Joined: November 9th, 2006, 15:15
Posts: 2984

Most likely heads are damaged and the ID you see is partial ID from ROM

Professional diagnosis is required for a more accurate diagnostic...

Top

microsoftengineer

Post subject: Re: WD Caviar problem: WD1000BB-75CHE0

Posted: September 21st, 2010, 8:09

Joined: January 4th, 2010, 5:12
Posts: 215
Location: Dubai U.A.E

Agree with HDDGuy Heads might Damage do u have Professional Tools ? if not send to any Pro.DR company DIY will not work on it .

Top

edsel

Post subject: Re: WD Caviar problem: WD1000BB-75CHE0

Posted: September 21st, 2010, 8:47

Joined: March 12th, 2009, 18:31
Posts: 32
Location: Sweden

Yes, I was afraid for that but the topic of BGman gave me some hope:

Quote:

In the case of WD drives I have found a relatively easy way to identify drives with broken heads. Just put the drive in safe mode and use the ID command (MHDD). If the drive reports the same model as on the label the heads are OK, if not - there is a head broken.
For example WD400EB could identify itself as WD1000BB (no good heads) or WD200EB (1 good head).

You find it on
clicking-noise-drives-bad-head-t7820.html?hilit=wd1000bb

_________________
Edsel
---------------------------------

Top

mr_spokk

Post subject: Re: WD Caviar problem: WD1000BB-75CHE0

Posted: September 21st, 2010, 16:33

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden

Hi,
On those drives it's very common with bad Pcb's.
As you have access to pc3000, put the pcb in kernel, read out the rom, find a good pcb with the same number 2060-001102-xxx and replace the rom (or desolder the u2 chip, and replace on donor).
I have this in stock if you need donor for heads:
W0035, 1000BB, 75CHE0, 13-okt-01, HSEHBT2CH, 2060-001102-002

Regards/ Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Top

Page 1 of 1

[ 5 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 77 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum