View topic - Fujitsu 2,5" MHS2040AT

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Fujitsu 2,5" MHS2040AT

Page 1 of 1

[ 14 posts ]

Previous topic | Next topic

Author

Message

pclab

Post subject: Fujitsu 2,5" MHS2040AT

Posted: September 18th, 2010, 6:25

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Hi there

A problem with this disk.

The disk is not detected, not even by doctor, but it says Ready.
I got a donor PCB and changed the ROM. If I try to read the ROM, I get F3M108.

When trying to load from HDD on the bottom I get ERROR. No operations can be made in the Firmware options.
Read SA MAP, get error too.

Is this Heads? Or....

Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pcimage

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 18th, 2010, 6:59

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Listen very carefully when you power up the drive.

Do you actually hear the heads come off the ramp and try to load FW, or does it just spinup but the heads stay put?

Compare it to a good drives' noise.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 18th, 2010, 7:20

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

I don't hear any strange noise... That's odd...
It seems to spin up OK.... No BZZZZ ou tick-tick's....

Not even at first, with the original PCB.

The client said that it had an USB power surge, but nothing seems to be toasted...

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 20th, 2010, 8:08

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

No more ideas/hints?

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Alexii

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 20th, 2010, 9:03

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto

preamplifier maybe.

Top

msurgeon

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 20th, 2010, 12:57

Joined: August 14th, 2008, 10:39
Posts: 257
Location: Morris Plains, New Jersey

If you're experienced you should change heads. If that doesn't work then most likely SA is damaged and that's a brick wall.

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 20th, 2010, 17:54

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Hi

Not experiencied yet on changing heads and don't have a donor :shock:

Gonna outsource it...

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 21st, 2010, 17:39

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Does anyone have a SA map for this model? Or even firmware?
Thank You

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

DR-Kiev

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 22nd, 2010, 5:36

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery

pclab wrote:

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

_________________
Angel Data Recovery

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 22nd, 2010, 16:05

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

DR-Kiev wrote:

pclab wrote:

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

Maybe. Do you have it?
Thanks

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

DR-Kiev

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 24th, 2010, 1:54

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery

pclab wrote:

DR-Kiev wrote:

pclab wrote:

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

Maybe. Do you have it?
Thanks

Take.

Attachments:

FUJITSU MHS2020AT-8004-NL42T2C12PE0.ZIP [264.88 KiB]
Downloaded 497 times

_________________
Angel Data Recovery

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 24th, 2010, 16:54

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Thanks. Let's see then...

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

ppumkin

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 26th, 2010, 8:14

Joined: May 7th, 2010, 13:20
Posts: 595
Location: United Kindgom

Did you solve it?

_________________
It seems that the unluckiest people in the world are those that don't backup.
Free Solutions
Picasaweb- Pictures and movies | Dropbox - Documents and other..

Top

pclab

Post subject: Re: Fujitsu 2,5" MHS2040AT

Posted: September 26th, 2010, 8:27

Joined: July 12th, 2010, 4:38
Posts: 1451
Location: Portugal

Not yet.... Just tomorrow I'll check it.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Top

Page 1 of 1

[ 14 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum