View topic - RAID5 - HP Smart Array E200, failed drive.

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

RAID5 - HP Smart Array E200, failed drive.

Page 1 of 2

[ 25 posts ]

Go to page 1, 2 Next

Previous topic | Next topic

Author

Message

d1554573r

Post subject: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 10:23

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Hi,

Thanks to a power spike around two weeks ago two out of four hdds in my server raid5 array died, i found a guy that was able to bring one of them back to life, but array didnt recognise it properly.

So atm, im trying to recover data from 3 out of 4 drives.

Server was configured by hp and it had standart raid configuration. Serwer model: Hp AIO 400r.
So atm, im struggling with guessing correct configuration,(i tried ZAR but it appears to hang @ 100% of quick identifing of data)

I tried R-Studio but resources on hp configurations of arrays are extremly limited. Scan of the virtual raid returns viewable files.

(Yes, i know what im doing, and yes the data is extremly important)

Can anyone help me out finding out the proper configuration for r-studio? (or sharing other suggestions ofc)

Top

Touchclarity

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 10:35

Joined: July 21st, 2010, 5:03
Posts: 247
Location: Norfolk, UK

Hi,

Have you tried RAID reconstructor from runtime software.... solved many a RAID issue for me...

_________________
East Anglian Data Recovery Services
http://www.eadr.co.uk

"If it's your only copy - then it's not a backup!"

Top

dobrevjetser

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 10:39

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium

If its a hp server there is a special config for the raid that only winhex (afaik) supports without hassle.
You can use rstudio also, but its a lot of manual work.
Hp/Compaq uses delayed stripe.

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 10:47

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Touchclarity wrote:

Hi,

Have you tried RAID reconstructor from runtime software.... solved many a RAID issue for me...

I did, results were inconclusive.

dobrevjetser wrote:

If its a hp server there is a special config for the raid that only winhex (afaik) supports without hassle.
You can use rstudio also, but its a lot of manual work.
Hp/Compaq uses delayed stripe.

I've saw mentions about this special config in the forums here but, since cat&mouse stuff related with reverse eng. the awnser to that other poor guys question was delivered to him via pm, and he didn't share the conclusion in the topic other then the fact of recovering 75% of data, no tech stuff.

Thanks for fast replys.

Last edited by d1554573r on November 24th, 2010, 10:51, edited 1 time in total.

Top

dmarques

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 10:48

Joined: November 6th, 2006, 6:58
Posts: 1752

RAID Reconstructor will not help you in this case, as doesn't support delayed stripe.
You really have to find out the config and rebuild it using winhex for example.

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 11:05

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Seems like i got yet another reason to dislike hp products...

Top

dmarques

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 11:14

Joined: November 6th, 2006, 6:58
Posts: 1752

Don't be like that :mrgreen:

HP has good and bad products like everyone else.
In this case you can still rebuild it.

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 13:03

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Quote:

The E200 and P400 are LSI chipsets and don't follow the delayed parity rotation of the typical SmartArrays. RAID controller metadata is on the back. Search for keywords HPSA_RIS and the first hex character of that sector will spell out the order of each drive.

First off it's a Forward parity rotation usually 128 sectors starting at sector zero and not 1088. Also, partity starts on the second component and not the first.

This is the best Intel i was able to find on google [http://www.x-ways.net/winhex/forum/messages/174/2987.html?1280356762]

But i dont know how this translates to r-studio?

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 13:09

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Quote:

First off it's a Forward parity rotation usually 128 sectors starting at sector zero and not 1088. Also, partity starts on the second component and not the first.

So far this is the best intel i found on google about e200. From what I understand its Right Asynchronous, 128 (256K). But i don't get the second component part.

Code:

The E200 and P400 are LSI chipsets and don't follow the delayed parity rotation of the typical SmartArrays. RAID controller metadata is on the back. Search for keywords HPSA_RIS and the first hex character of that sector will spell out the order of each drive. 

Anyone understands a bit more out of this then I do?

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 15:49

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Ok, I studied some literature on the subject and so far i understand that this parity would look like this:

P1-01-02-03
P2-04-05-06
P3-07-08-09
P4-10-11-12
15-P2-14-13
16-P2-17-18
19-P2-xx-xx

This how forward async delayed parity with 4 stripes delay would look like I guess?

Hmmm, now I think i understand the second component parity

01-P1-02-03
04-P1-05-06
07-P1-08-09
10-P1-11-12
13-14-P2-15
ETC...

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 16:07

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

I dunno why i can't edit my previous posts...

In the end I think the order would look like this:

HDD1-HDD2-HDD3-HDD4

01-P0-02-03
04-P1-05-06
07-P2-08-09
10-P3-12-13
14-15-P4-16
17-18-P5-19
20-21-P6-22
23-24-P7-25

Does it make any sense?

Since it starts at sector 0 instead of 1088 this would mean this raid has no header... Seems like tomorrow is a hex day :/

Top

dmarques

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 16:24

Joined: November 6th, 2006, 6:58
Posts: 1752

If MBR starts on sector 0 it has no header. That's true.

Top

lcoughey

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 24th, 2010, 17:21

Joined: February 9th, 2009, 16:13
Posts: 2574
Location: Ontario, Canada

If you haven't done so already, it would be wise to clone each drive and work off the clones...especially considering how valuable the data is.

Also, can you confirm that the two drives did go down at the same time? Is it possible that the drive that was "fixed" went down before the other, thus the reason why it isn't being accepted by the RAID? I'm also curious to know what was wrong with the bad drives and what was done to "repair" the one drive. It would suck for you to spend a lot of time fighting with the recovery and find out that the one drive doesn't even have useful information on it.

_________________
Luke
Recovery Force Data Recovery

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 4:15

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

I tried my own preset for r-studio assuming that delay = 4:

Code:

<?xml version="1.0" encoding="UTF-8" ?>

<RAIDList>
  <RAID blockSize="131072" name="Smart Array E200" parents="4" rows="16">

    <Table>

      <Block id="A1">1</Block>

      <Block id="B1">XorOfData</Block>

      <Block id="C1">2</Block>

      <Block id="D1">3</Block>

      <Block id="A2">4</Block>

      <Block id="B2" sequence="1">XorOfData</Block>

      <Block id="C2">5</Block>

      <Block id="D2">6</Block>

      <Block id="A3">7</Block>

      <Block id="B3" sequence="2">XorOfData</Block>

      <Block id="C3">8</Block>

      <Block id="D3">9</Block>

      <Block id="A4">10</Block>

      <Block id="B4" sequence="3">XorOfData</Block>

      <Block id="C4">11</Block>

      <Block id="D4">12</Block>

      <Block id="A5">13</Block>

      <Block id="B5">14</Block>

      <Block id="C5" sequence="4">XorOfData</Block>

      <Block id="D5">15</Block>

      <Block id="A6">16</Block>

      <Block id="B6">17</Block>

      <Block id="C6" sequence="5">XorOfData</Block>

      <Block id="D6">18</Block>

      <Block id="A7">19</Block>
      <Block id="B7">20</Block>

      <Block id="C7" sequence="6">XorOfData</Block>

      <Block id="D7">21</Block>
      <Block id="A8">22</Block>

      <Block id="B8">23</Block>
      <Block id="C8" sequence="7">XorOfData</Block>

      <Block id="D8">24</Block>
      <Block id="A9">25</Block>

      <Block id="B9">26</Block>

      <Block id="C9">27</Block>

      <Block id="D9" sequence="8">XorOfData</Block>

      <Block id="A10">28</Block>

      <Block id="B10">29</Block>

      <Block id="C10">30</Block>

      <Block id="D10" sequence="9">XorOfData</Block>

      <Block id="A11">31</Block>

      <Block id="B11">32</Block>

      <Block id="C11">33</Block>

      <Block id="D11" sequence="10">XorOfData</Block>

      <Block id="A12">34</Block>

      <Block id="B12">35</Block>

      <Block id="C12">36</Block>

      <Block id="D12" sequence="11">XorOfData</Block>

      <Block id="A13" sequence="13">XorOfData</Block>

      <Block id="B13">37</Block>

      <Block id="C13">38</Block>

      <Block id="D13">39</Block>

      <Block id="A14" sequence="14">XorOfData</Block>
 
      <Block id="B14">40</Block>

      <Block id="C14">41</Block>

      <Block id="D14">42</Block>

      <Block id="A15" sequence="15">XorOfData</Block>

      <Block id="B15">43</Block>

      <Block id="C15">44</Block>

      <Block id="D15">45</Block>
      <Block id="A16" sequence="16">XorOfData</Block>

      <Block id="B16">46</Block>

      <Block id="C16">47</Block>

      <Block id="D16">48</Block>

    </Table>
    <Sequences>

      <Sequence id="1">B2</Sequence>

      <Sequence id="2">B3</Sequence>

      <Sequence id="3">B4</Sequence>

      <Sequence id="4">C5 C6</Sequence>

      <Sequence id="5">C6</Sequence>

      <Sequence id="6">C7 C8</Sequence>

      <Sequence id="7">C8</Sequence>

      <Sequence id="8">D9</Sequence>

      <Sequence id="9">D10</Sequence>

      <Sequence id="10">D11</Sequence>

      <Sequence id="11">D12 A13</Sequence>

      <Sequence id="12">A14</Sequence>

      <Sequence id="13">A13</Sequence>

      <Sequence id="14">A14</Sequence>

      <Sequence id="15">A15</Sequence>

      <Sequence id="16">A16</Sequence>

    </Sequences>

  </RAID>

</RAIDList>

But it didn't work

now im about to try delay = 8 gahh

Im not 100% sure the other hdd died with the one recovered but due to the damage the other one recieved theres a chance that it died earlier then the revived one. I made 1:1 copies of hdd's since those hdd's are 500Gb in size and im kinda short @ capacity since the dead server was the nas around here...

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 4:48

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Okey, imteresting things came out when I made xml for Forward parity rotation usually starting on the second component, scan looks more like a regular hdd ....

Code:

  </RAID>
<RAID blockSize="65536" name="Smartv2" parents="4" rows="4">
<Table>
  <Block id="A1">1</Block> 
  <Block id="B1" sequence="1">XorOfData</Block> 
  <Block id="C1">2</Block> 
  <Block id="D1">3</Block> 
  <Block id="A2">4</Block> 
  <Block id="B2">5</Block> 
  <Block id="C2" sequence="3">XorOfData</Block> 
  <Block id="D2">6</Block> 
  <Block id="A3">7</Block> 
  <Block id="B3">8</Block> 
  <Block id="C3">9</Block> 
  <Block id="D3" sequence="4">XorOfData</Block> 
  <Block id="A4" sequence="2">XorOfData</Block> 
  <Block id="B4">10</Block> 
  <Block id="C4">11</Block> 
  <Block id="D4">12</Block> 
  </Table>
<Sequences>
  <Sequence id="1">B1 C2 D3</Sequence> 
  <Sequence id="2">A4</Sequence> 
  <Sequence id="3">C2</Sequence> 
  <Sequence id="4">D3</Sequence> 
  </Sequences>
  </RAID>
  </RAIDList>

Top

d1554573r

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 7:35

Joined: November 24th, 2010, 10:08
Posts: 14
Location: Poland

Ok, gurus so far i got no real progress, but i found that each 8 sectors RCRD tag appears in asci, I got a wild guess this can be some kind of stripe marker and this would mean that stripe size is 4kb, whats more this tag appears on 0 sector on 2nd hdd just like that guy on x-ray forums suggested. Can any one confim this?

Top

dmarques

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 7:56

Joined: November 6th, 2006, 6:58
Posts: 1752

Don't think that has anything to do with any marker. That's most probably from NTFS file system.

Top

DR-Kiev

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 16:26

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery

d1554573r wrote:

You are on right way, but still a lot mistakes :wink:

For forward delayd parity it should look like this:

Attachments:

12.JPG [ 217.99 KiB | Viewed 16446 times ]

_________________
Angel Data Recovery

Top

DR-Kiev

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 16:30

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery

d1554573r wrote:

Okey, imteresting things came out when I made xml for Forward parity rotation usually starting on the second component, scan looks more like a regular hdd ....

Code:

  </RAID>
<RAID blockSize="65536" name="Smartv2" parents="4" rows="4">
<Table>
  <Block id="A1">1</Block> 
  <Block id="B1" sequence="1">XorOfData</Block> 
  <Block id="C1">2</Block> 
  <Block id="D1">3</Block> 
  <Block id="A2">4</Block> 
  <Block id="B2">5</Block> 
  <Block id="C2" sequence="3">XorOfData</Block> 
  <Block id="D2">6</Block> 
  <Block id="A3">7</Block> 
  <Block id="B3">8</Block> 
  <Block id="C3">9</Block> 
  <Block id="D3" sequence="4">XorOfData</Block> 
  <Block id="A4" sequence="2">XorOfData</Block> 
  <Block id="B4">10</Block> 
  <Block id="C4">11</Block> 
  <Block id="D4">12</Block> 
  </Table>
<Sequences>
  <Sequence id="1">B1 C2 D3</Sequence> 
  <Sequence id="2">A4</Sequence> 
  <Sequence id="3">C2</Sequence> 
  <Sequence id="4">D3</Sequence> 
  </Sequences>
  </RAID>
  </RAIDList>

I hope it will help you, take this

:
<RAIDList>
<RAID blockSize="16384" name="RAIDLayoutHP_Forward4D" parents="4" rows="64">
<Table>
<Block id="A1">XorOfData</Block>
<Block id="B1">1</Block>
<Block id="C1">2</Block>
<Block id="D1">3</Block>
<Block id="A2">XorOfData</Block>
<Block id="B2">4</Block>
<Block id="C2">5</Block>
<Block id="D2">6</Block>
<Block id="A3">XorOfData</Block>
<Block id="B3">7</Block>
<Block id="C3">8</Block>
<Block id="D3">9</Block>
<Block id="A4">XorOfData</Block>
<Block id="B4">10</Block>
<Block id="C4">11</Block>
<Block id="D4">12</Block>
<Block id="A5">XorOfData</Block>
<Block id="B5">13</Block>
<Block id="C5">14</Block>
<Block id="D5">15</Block>
<Block id="A6">XorOfData</Block>
<Block id="B6">16</Block>
<Block id="C6">17</Block>
<Block id="D6">18</Block>
<Block id="A7">XorOfData</Block>
<Block id="B7">19</Block>
<Block id="C7">20</Block>
<Block id="D7">21</Block>
<Block id="A8">XorOfData</Block>
<Block id="B8">22</Block>
<Block id="C8">23</Block>
<Block id="D8">24</Block>
<Block id="A9">XorOfData</Block>
<Block id="B9">25</Block>
<Block id="C9">26</Block>
<Block id="D9">27</Block>
<Block id="A10">XorOfData</Block>
<Block id="B10">28</Block>
<Block id="C10">29</Block>
<Block id="D10">30</Block>
<Block id="A11">XorOfData</Block>
<Block id="B11">31</Block>
<Block id="C11">32</Block>
<Block id="D11">33</Block>
<Block id="A12">XorOfData</Block>
<Block id="B12">34</Block>
<Block id="C12">35</Block>
<Block id="D12">36</Block>
<Block id="A13">XorOfData</Block>
<Block id="B13">37</Block>
<Block id="C13">38</Block>
<Block id="D13">39</Block>
<Block id="A14">XorOfData</Block>
<Block id="B14">40</Block>
<Block id="C14">41</Block>
<Block id="D14">42</Block>
<Block id="A15">XorOfData</Block>
<Block id="B15">43</Block>
<Block id="C15">44</Block>
<Block id="D15">45</Block>
<Block id="A16">XorOfData</Block>
<Block id="B16">46</Block>
<Block id="C16">47</Block>
<Block id="D16">48</Block>
<Block id="A17">49</Block>
<Block id="B17">XorOfData</Block>
<Block id="C17">50</Block>
<Block id="D17">51</Block>
<Block id="A18">52</Block>
<Block id="B18">XorOfData</Block>
<Block id="C18">53</Block>
<Block id="D18">54</Block>
<Block id="A19">55</Block>
<Block id="B19">XorOfData</Block>
<Block id="C19">56</Block>
<Block id="D19">57</Block>
<Block id="A20">58</Block>
<Block id="B20">XorOfData</Block>
<Block id="C20">59</Block>
<Block id="D20">60</Block>
<Block id="A21">61</Block>
<Block id="B21">XorOfData</Block>
<Block id="C21">62</Block>
<Block id="D21">63</Block>
<Block id="A22">64</Block>
<Block id="B22">XorOfData</Block>
<Block id="C22">65</Block>
<Block id="D22">66</Block>
<Block id="A23">67</Block>
<Block id="B23">XorOfData</Block>
<Block id="C23">68</Block>
<Block id="D23">69</Block>
<Block id="A24">70</Block>
<Block id="B24">XorOfData</Block>
<Block id="C24">71</Block>
<Block id="D24">72</Block>
<Block id="A25">73</Block>
<Block id="B25">XorOfData</Block>
<Block id="C25">74</Block>
<Block id="D25">75</Block>
<Block id="A26">76</Block>
<Block id="B26">XorOfData</Block>
<Block id="C26">77</Block>
<Block id="D26">78</Block>
<Block id="A27">79</Block>
<Block id="B27">XorOfData</Block>
<Block id="C27">80</Block>
<Block id="D27">81</Block>
<Block id="A28">82</Block>
<Block id="B28">XorOfData</Block>
<Block id="C28">83</Block>
<Block id="D28">84</Block>
<Block id="A29">85</Block>
<Block id="B29">XorOfData</Block>
<Block id="C29">86</Block>
<Block id="D29">87</Block>
<Block id="A30">88</Block>
<Block id="B30">XorOfData</Block>
<Block id="C30">89</Block>
<Block id="D30">90</Block>
<Block id="A31">91</Block>
<Block id="B31">XorOfData</Block>
<Block id="C31">92</Block>
<Block id="D31">93</Block>
<Block id="A32">94</Block>
<Block id="B32">XorOfData</Block>
<Block id="C32">95</Block>
<Block id="D32">96</Block>
<Block id="A33">97</Block>
<Block id="B33">98</Block>
<Block id="C33">XorOfData</Block>
<Block id="D33">99</Block>
<Block id="A34">100</Block>
<Block id="B34">101</Block>
<Block id="C34">XorOfData</Block>
<Block id="D34">102</Block>
<Block id="A35">103</Block>
<Block id="B35">104</Block>
<Block id="C35">XorOfData</Block>
<Block id="D35">105</Block>
<Block id="A36">106</Block>
<Block id="B36">107</Block>
<Block id="C36">XorOfData</Block>
<Block id="D36">108</Block>
<Block id="A37">109</Block>
<Block id="B37">110</Block>
<Block id="C37">XorOfData</Block>
<Block id="D37">111</Block>
<Block id="A38">112</Block>
<Block id="B38">113</Block>
<Block id="C38">XorOfData</Block>
<Block id="D38">114</Block>
<Block id="A39">115</Block>
<Block id="B39">116</Block>
<Block id="C39">XorOfData</Block>
<Block id="D39">117</Block>
<Block id="A40">118</Block>
<Block id="B40">119</Block>
<Block id="C40">XorOfData</Block>
<Block id="D40">120</Block>
<Block id="A41">121</Block>
<Block id="B41">122</Block>
<Block id="C41">XorOfData</Block>
<Block id="D41">123</Block>
<Block id="A42">124</Block>
<Block id="B42">125</Block>
<Block id="C42">XorOfData</Block>
<Block id="D42">126</Block>
<Block id="A43">127</Block>
<Block id="B43">128</Block>
<Block id="C43">XorOfData</Block>
<Block id="D43">129</Block>
<Block id="A44">130</Block>
<Block id="B44">131</Block>
<Block id="C44">XorOfData</Block>
<Block id="D44">132</Block>
<Block id="A45">133</Block>
<Block id="B45">134</Block>
<Block id="C45">XorOfData</Block>
<Block id="D45">135</Block>
<Block id="A46">136</Block>
<Block id="B46">137</Block>
<Block id="C46">XorOfData</Block>
<Block id="D46">138</Block>
<Block id="A47">139</Block>
<Block id="B47">140</Block>
<Block id="C47">XorOfData</Block>
<Block id="D47">141</Block>
<Block id="A48">142</Block>
<Block id="B48">143</Block>
<Block id="C48">XorOfData</Block>
<Block id="D48">144</Block>
<Block id="A49">145</Block>
<Block id="B49">146</Block>
<Block id="C49">147</Block>
<Block id="D49">XorOfData</Block>
<Block id="A50">148</Block>
<Block id="B50">149</Block>
<Block id="C50">150</Block>
<Block id="D50">XorOfData</Block>
<Block id="A51">151</Block>
<Block id="B51">152</Block>
<Block id="C51">153</Block>
<Block id="D51">XorOfData</Block>
<Block id="A52">154</Block>
<Block id="B52">155</Block>
<Block id="C52">156</Block>
<Block id="D52">XorOfData</Block>
<Block id="A53">157</Block>
<Block id="B53">158</Block>
<Block id="C53">159</Block>
<Block id="D53">XorOfData</Block>
<Block id="A54">160</Block>
<Block id="B54">161</Block>
<Block id="C54">162</Block>
<Block id="D54">XorOfData</Block>
<Block id="A55">163</Block>
<Block id="B55">164</Block>
<Block id="C55">165</Block>
<Block id="D55">XorOfData</Block>
<Block id="A56">166</Block>
<Block id="B56">167</Block>
<Block id="C56">168</Block>
<Block id="D56">XorOfData</Block>
<Block id="A57">169</Block>
<Block id="B57">170</Block>
<Block id="C57">171</Block>
<Block id="D57">XorOfData</Block>
<Block id="A58">172</Block>
<Block id="B58">173</Block>
<Block id="C58">174</Block>
<Block id="D58">XorOfData</Block>
<Block id="A59">175</Block>
<Block id="B59">176</Block>
<Block id="C59">177</Block>
<Block id="D59">XorOfData</Block>
<Block id="A60">178</Block>
<Block id="B60">179</Block>
<Block id="C60">180</Block>
<Block id="D60">XorOfData</Block>
<Block id="A61">181</Block>
<Block id="B61">182</Block>
<Block id="C61">183</Block>
<Block id="D61">XorOfData</Block>
<Block id="A62">184</Block>
<Block id="B62">185</Block>
<Block id="C62">186</Block>
<Block id="D62">XorOfData</Block>
<Block id="A63">187</Block>
<Block id="B63">188</Block>
<Block id="C63">189</Block>
<Block id="D63">XorOfData</Block>
<Block id="A64">190</Block>
<Block id="B64">191</Block>
<Block id="C64">192</Block>
<Block id="D64">XorOfData</Block>
</Table>
</RAID>
</RAIDList>

_________________
Angel Data Recovery

Last edited by DR-Kiev on November 25th, 2010, 16:38, edited 1 time in total.

Top

DR-Kiev

Post subject: Re: RAID5 - HP Smart Array E200, failed drive.

Posted: November 25th, 2010, 16:36

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery

d1554573r wrote:

David Marques right, it is MFT records ( RCRD = Record). Step must = 1 cluster , so in your NTFS it is = 8 sectors

_________________
Angel Data Recovery

Top

Page 1 of 2

[ 25 posts ]

Go to page 1, 2 Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum