View topic - PCB CHECKING

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

PCB CHECKING

Page 1 of 1

[ 4 posts ]

Previous topic | Next topic

Author

Message

SALIM

Post subject: PCB CHECKING

Posted: February 17th, 2011, 18:38

Joined: August 29th, 2010, 20:24
Posts: 184
Location: pakistan

sorry to all, i am new, my hdd spining up, but do not detect in bios, anybody please tell me how to check the pcb, PLEASE
THANKS

Attachments:

100336321-rev-b.jpg [ 108.87 KiB | Viewed 4660 times ]

Top

pcimage

Post subject: Re: PCB CHECKING

Posted: February 17th, 2011, 19:10

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

If it's spinning, the TVS are OK

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

fzabkar

Post subject: Re: PCB CHECKING

Posted: February 17th, 2011, 20:00

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

If the drive spins up, then the PCB is probably OK.

_________________
A backup a day keeps DR away.

Top

poehere

Post subject: Re: PCB CHECKING

Posted: February 17th, 2011, 22:55

Joined: February 27th, 2009, 3:26
Posts: 1721
Location: French Polynesia Tahiti

You need more expert to diagnose your problem. Sounds internal to the HDD the reson your bios is not seeing it anymore. You might take it to a shop that can tell you what is wrong with it and give you an estimate on how much it would cost to get back your data on this one

_________________
Iorana Haraharaini

Top

Page 1 of 1

[ 4 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum