MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Maxtor(Seagate) 500 GB External drive. Not readable.
PostPosted: April 5th, 2011, 2:00 
Offline

Joined: April 5th, 2011, 1:41
Posts: 1
Location: Bangalore
Hi All,
One fine day my external hdd was stopped recognizing in the Win-XP machine, Steps that I did to correct
-> check the connection, tried in some other machine-- No result
-> Do some google , deleting the usb registry -- No result
-> I took it to a local market, However in the Bios it showed 0 MB,
-> this is when i realized that it could be a 0LBA error. I tied the http://www.msfn.org/board/topic/128807- ... 0011-hdds/
-> Bingoo !!!!, the drive started to be recognized in my Win -XP machine, I get the drive leter as well.

Now the problem is when i try to access the data , it says 'Not readable/damaged data' . The data is extremly important for me. Have stored all my pics,s/w, drivers, almost everything in there.
I tried the 'Seagate data recovery' and the data were accessible by the recovetry s/w. However the the trial version do not recover files that were more than 164Kb, Or say i get error saying the file is not recoverable in the trial mode. I cannot afford to but the s/w.
I have not tried the firmware update, fearing that may lead to loss of data. i would like to try the firmware update after i backup my data from the faulty disk.
Could some one please help me in retrieving the data first ,
and also want to know if i go for a firm ware -update, Will my disk will be running normally as in the past with the data still intact ?? how do i go about. Please note that mine is a IDE machine, though I have SATA , i havent tried it connecting the drive yet. Will do it.

Help much appreciated

Regards
Ujjal


Top
 Profile  
 
 Post subject: Re: Maxtor(Seagate) 500 GB External drive. Not readable.
PostPosted: May 7th, 2011, 22:24 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
A firmware update on the drive will not give you access to the data. Seemd some sort of data corruption occurred. Find a free/something you can afford/ software to run a scan on your drive and extract the data.


Top
 Profile  
 
 Post subject: Re: Maxtor(Seagate) 500 GB External drive. Not readable.
PostPosted: May 7th, 2011, 23:36 
Offline
User avatar

Joined: September 16th, 2006, 8:51
Posts: 141
Location: Vietnam
Before you try to do something for recovery your data, you must determinded what and/or where is problem: bad UBA and/or LBA, PLIST or GLIST error...

_________________
* Có ba thứ ngu dốt :

Không hiểu biết những gì mình đáng biết.
Hiểu biết không rành những gì mình biết.
Hiểu biết những gì mình không cần biết.


Top
 Profile  
 
 Post subject: Re: Maxtor(Seagate) 500 GB External drive. Not readable.
PostPosted: May 8th, 2011, 0:55 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Applying the 'internet fix' without knowing the cause that lead to 0 lba often cause this. Now maybe only a raw recovery... If the problem is not elsewhere (I think so from outcome and symptom). Good luck.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 73 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group