Hi Guys

I have a Samsung HM322IX with USB interface only, 3 - 4 second after power on, the motor shuts down. , i rigged up the SATA only connection with the same result.

Here's the terminal message:
Anyone can interpret this?

thank you.

%VID=0007 PN=0000 Rev=0004
*PA VID=0007 PN=0000 Rev=0004
PSL
U
S_0Shock Sensor Circuit Enabled
SO_1
Init RPM=0
IS=6
CLA #36/100
Handoff RPM=477
SPOK
mS1 00000003
A1O=125 A1G=439
O=515 S=0
SK C: 4612 H:0
Loaded FIT ( 0: 0: 1)
Reso Table Loaded
RRO1X Read OK
Overlay Code Loaded to 0x1004A000
FdtTable Loaded. Rev:0x01
| 19 | RLIST | 3 | 0 | 128 | 1340 |
| 19 | RLIST | 3 | 1 | 128 | 1340 |
| 19 | RLIST | 3 | 2 | 128 | 1340 |
Reading Serial Num Pass
Up MC

PwrOn RRO1x @ H0
Table) cos = -698880, sin = 902912
Coeff) cos = -19909, sin = 20464

DiskSlip : 105 [SrvTrk]
DiskSlip : 107 [SrvTrk]

PwrOn RRO1x @ H1
Table) cos = -698112, sin = 909056
Coeff) cos = 15593, sin = -28288

DiskSlip : 105 [SrvTrk]
DiskSlip : 101 [SrvTrk]
TgtCyl: 842
Hd: 0 Zn: 0 Avg.: 20
TgtCyl: 169771
Hd: 0 Zn: 1 Avg.: 890

SVCAL(0080,0000)-->PASS
RecordValid Fail : 0107647D 0107E41D
SoUL!
PK_4 C: 8493 H:0
Software unloading!
PK_4 C: 8493 H:0
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04
LED 1A04

i have the same problem
any solution for this problem please ?

it is either a bad head, or a corrupt A-list

Spildit, i have SalvationData HD Doctor, do you think this can help ?

_________________
Azzan Shahid
No one is master in this world but only His Almighty
www.datarecoverytanzania.co.tz

where is the other thread ? can you send me the link please thanks

_________________
Azzan Shahid
No one is master in this world but only His Almighty
www.datarecoverytanzania.co.tz