MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Need PCB WD1002FAEX
PostPosted: October 6th, 2011, 23:28 
Offline

Joined: October 6th, 2011, 23:22
Posts: 5
Location: United States
PCB - 2061-771640-H03
Date: 08 Sept 2010
DCM: HANNHTJAAB

Drive just up and stopped working. No sounds, anything. Absolutely no power gets to drive, thinking its gotta be the PCB. Nothing on it looks bad, scorched or broken but just one day - nothing.


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 2:30 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Check PCB first for TVS problems. (search this forum)

Then post pic of board (component side) here

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 2:49 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Check PCB first for TVS problems. (search this forum)

Then post pic of board (component side) here

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 11:40 
Offline

Joined: April 25th, 2009, 11:42
Posts: 382
Location: China
Hi, we have this working PCB in stock, pls contact my hotmail to see if we can help or not.

Thanks, Eric

_________________
Provided HDD PCBs and donor HDD, Real in stock
eric_lee8341@hotmail.com


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 11:54 
Offline

Joined: October 6th, 2011, 23:22
Posts: 5
Location: United States
I searched for TVS, Im not pulling anything up.

Once I get home I will post some detailed pictures. Im pretty handy and I can work my way around electronics. If not, I know someone who can.

Id really prefer to just replace the board.

Eric, I will email you.


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 12:13 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
You can't just replace the board, there is adaptive ROM information that needs to be transferred.

As I remember there are two versions of the 771640 PCB, one with external ROM and one with masked internal ROM. Hence the pic request.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 14:24 
Offline

Joined: October 6th, 2011, 23:22
Posts: 5
Location: United States
Hopefully its not the internal. Its manufactured from like sept 2010, so hopefully that helps.


Attachments:
2011-10-07_14-22-24_397.jpg
2011-10-07_14-22-24_397.jpg [ 1.78 MiB | Viewed 11348 times ]
2011-10-07_14-22-10_738.jpg
2011-10-07_14-22-10_738.jpg [ 1.8 MiB | Viewed 11348 times ]
Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 14:48 
Offline

Joined: October 6th, 2011, 23:22
Posts: 5
Location: United States
Sorry for the double post, I dont see an edit button.

Also, I noticed this PRINTED on the board, NOT on the white label (The white label code is the one I listed above, I see this one differs)

2060-771640-003 REV P1


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 7th, 2011, 15:25 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
As pointed, this pcb contains an external rom chip which needs to be transfered to new pcb.

Be careful when doing the transfer and if you're not too skilled with soldering work, give it to someone who is (ie. a pro). If you screw things up with soldering, things can go really nasty.

Good luck.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 8th, 2011, 4:54 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Yep, ROM is at U12 near the bottom of the first pic.

As northwind says, make sure whoever swaps the chip is 100% confident of their de-solder and resolder skills. Any mistake there could prove VERY costly.

You have been advised to go to a pro, so if you insist on DIY then be prepared to accept the consequences.

Good luck!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 8th, 2011, 11:56 
Offline

Joined: October 6th, 2011, 23:22
Posts: 5
Location: United States
Ok. Well, thats still going to be cheaper than sending it to a data recovery place and paying an estimated 900-1100 in recovery.

Ive almost accepted that this data is gone forever. If I get it back, freakin fantastic. But Im pretty pumped that there is actually one more solution that I can afford.

Visually, how does the rest of the board look? I was surprised not to see anything wrong. Im really hoping its nothing inside the drive. Again, if it is, so be it. Lesson learned, always run a mirrored RAID. But was wondering if anything else stuck out to you guys.


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 8th, 2011, 16:05 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
Well, if problem with pcb then the estimation of $900-1100 is completely off.
I'd advise you to have this disk diagnosed and if problem only with pcb then cost would be a portion of the amount you mention.
We charge around 200-250 euros for this kind of job. But if there is more damage to disk, well that's a different story. If diagnostics are free you've got nothing to lose.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 9th, 2011, 5:02 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Northwind is correct, no way should this job cost $900-1100. That is daylight robbery for a PCB problem assuming that's what they actually quoted for. If you asked for a "worst case scenario" quote then it's more realistic.

His estimate of €200-250 is much more realistic and reasonable.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Need PCB WD1002FAEX
PostPosted: October 13th, 2011, 5:38 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
coasterreal wrote:
I searched for TVS, Im not pulling anything up.

That's because HDD Guru's search engine doesn't search for 3-letter words.

See http://www.users.on.net/~fzabkar/HDD/TVS_diode_FAQ.html

... and http://www.users.on.net/~fzabkar/HDD/bi ... diodes.jpg

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group