MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
positivebit
 Post subject: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 9:30 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
i have got this 7200.12 ST31000528AS FW CC34.
the drive spin, make some high noise for 2 seconds like difficulty in calibration, than stay quite continuing spinning. it reach ready state and ID only after 20 seconds.
Drive was not dropped.
i can read all SA and i made backup, but i can't read sectors becouse it goes in timeout.
I am considering to regenerate traslator.


Last edited by positivebit on October 16th, 2011, 9:32, edited 1 time in total.

Top
 Profile  
 
einstein9
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 9:32 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
try to clear the smart and post the terminal log for better proper diagnose
post the terminal log from the beginning before n after the smart clearing

might be heads not sure

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
positivebit
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 9:37 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
Test : Reset S.M.A.R.T
SMART erase...
Reset S.M.A.R.T................................... : Error
Drive not ready

Rst 0x20M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
InitiateMarkPendingReallocateRequest for disc_lba: 00000067
Top
 Profile  
 
einstein9
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 9:53 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
Quote:
post the terminal log from the beginning before n after the smart clearing



i mean the moment you power ur drive ON till the end
post the log

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
positivebit
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 14:26 
Offline

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy
einstein9 wrote:

i mean the moment you power ur drive ON till the end
post the log



From power ON:
"
Rst 0x20M
(P) SATA Reset
PASS
RW: Error processing Performance Parameter File: 203C
Send Status: COMRESET seen
InitiateMarkPendingReallocateRequest for disc_lba: 00000067

"
till the END (drives gets ready)

why it was not good my previous post?

( if i try to reset smart,the drive goes to timeout and stay busy)
Top
 Profile  
 
Nick_CT
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 14:33 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
Pending bug? I've only seen that on Nighthawk though.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
BlackST
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 16th, 2011, 15:04 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
positivebit wrote:
i have got this 7200.12 ST31000528AS FW CC34.
the drive spin, make some high noise for 2 seconds like difficulty in calibration, than stay quite continuing spinning. it reach ready state and ID only after 20 seconds.
Drive was not dropped.
i can read all SA and i made backup, but i can't read sectors becouse it goes in timeout.
I am considering to regenerate traslator.


PESSIMA idea e col cavolo che funziona in queste condizioni.

REALLY BAD IDEA and it won't work even if you cry.
Top
 Profile  
 
einstein9
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 17th, 2011, 1:53 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
did u try to clear the G?

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
hddguy
 Post subject: Re: ST31000528AS ready after 20 sec.
PostPosted: October 17th, 2011, 2:35 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
Nick_CT wrote:
Pending bug? I've only seen that on Nighthawk though.


Common in 7200.12. This specific problem can be solved under 'HDD ID EDITING' commands within PC3K utility
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group