View topic - WD Hulk Healthy SA - but no access to surface

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD Hulk Healthy SA - but no access to surface

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

positivebit

Post subject: WD Hulk Healthy SA - but no access to surface

Posted: December 13th, 2011, 17:20

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy

after a headswap i can edit in ram head map and disable H3,H5 and get drive ID correctly.
but after building a map in DE i have got all blacks sectors.
seems like nly in Hulk family there is this issue reading prevoious post.
If somebody has solved and want to point me, just PM me. :mrgreen:

Top

Nick_CT

Post subject: Re: WD Hulk Healthy SA - but no access to surface

Posted: December 14th, 2011, 9:22

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

Check the ACE forum.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

hddguy

Post subject: Re: WD Hulk Healthy SA - but no access to surface

Posted: December 14th, 2011, 9:37

Joined: November 9th, 2006, 15:15
Posts: 2984

When you edit head map in RAM what do you change map to? Maybe there is problem with the 'paired' head you use in map to substitute for bad head.

Top

positivebit

Post subject: Re: WD Hulk Healthy SA - but no access to surface

Posted: December 14th, 2011, 9:56

Joined: March 28th, 2011, 17:45
Posts: 441
Location: italy

hddguy wrote:

When you edit head map in RAM what do you change map to? Maybe there is problem with the 'paired' head you use in map to substitute for bad head.

0.1.2.2.4.4.6.7

Top

hddguy

Post subject: Re: WD Hulk Healthy SA - but no access to surface

Posted: December 14th, 2011, 10:12

Joined: November 9th, 2006, 15:15
Posts: 2984

positivebit wrote:

0.1.2.2.4.4.6.7

Try 0.0.0.0.0.0.0.0 before soft reset, then set back to 0,1,2,3,4,5,6,7 (or what map you need)

Top

pcimage

Post subject: Re: WD Hulk Healthy SA - but no access to surface

Posted: December 14th, 2011, 17:33

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

hddguy wrote:

positivebit wrote:

0.1.2.2.4.4.6.7

Try 0.0.0.0.0.0.0.0 before soft reset, then set back to 0,1,2,3,4,5,6,7 (or what map you need)

That's what I usually do.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 96 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum