MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
henevien
 Post subject: Segate Barracuda Firmware Fix
PostPosted: March 3rd, 2012, 5:57 
Offline

Joined: March 3rd, 2012, 5:50
Posts: 10
Location: Australia
Hello guys, some help here.. yes, the first type of recoveries all of us start with. The Barracuda!

Got a ST3100033A S 1000GB 3.5" not detecting at POST.

Tried to reset using the BSY method but I got stuck at U (Spin-up)

http://www.msfn.org/board/topic/128807- ... 0011-hdds/

Rst 0x20M
ASCII Diag mode

F3 T>/2

F3 2>Z

Spin Down Complete
Elapsed Time 0.129 msecs
F3 2>U

DiagError 00006008
Spin Error
Elapsed Time 6 mins 42 secs
R/W Status 2 R/W Error 84150180
F3 2>

At this point, should I go ahead with Level 1, Smart Erase, etc?
Top
 Profile  
 
pcimage
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 3rd, 2012, 6:52 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
NO! Drives heads appear not to be reading properly.

Drive has more issues than just a "BSY bug", one size does not fit all!

Start with diagnosing it properly....

What does it do, EXACTLY? Normal noises? Click? Stay spinning? Spin down?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
henevien
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 4th, 2012, 0:34 
Offline

Joined: March 3rd, 2012, 5:50
Posts: 10
Location: Australia
When I put my ears to the hard drive, I hear a beep every few seconds, no spinups at all.
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 4th, 2012, 11:20 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
henevien wrote:
When I put my ears to the hard drive, I hear a beep every few seconds, no spinups at all.

Should not be applying busy fix to a stalled motor.....
I would stay away from those drives, if they are customer drives, before you make it worth....

_________________
www.datarecoveryne.com
Top
 Profile  
 
henevien
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 4th, 2012, 11:48 
Offline

Joined: March 3rd, 2012, 5:50
Posts: 10
Location: Australia
Nope, they are my own test drives. Sounds like I can't do much on my end?
Top
 Profile  
 
unknown
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 4th, 2012, 11:51 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1726
henevien wrote:
Rst 0x20MASCII Diag modeF3 T>/2F3 2>ZSpin Down CompleteElapsed Time 0.129 msecsF3 2>UDiagError 00006008Spin ErrorElapsed Time 6 mins 42 secsR/W Status 2 R/W Error 84150180F3 2>

henevien wrote:
When I put my ears to the hard drive, I hear a beep every few seconds, no spinups at all.

Heads are stucked to platters and/or seized motor. You will need a pro help in this case if you need the data.
Top
 Profile  
 
fzabkar
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 4th, 2012, 16:41 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17211
Location: Australia
The solution is very simple if you know how:
samsung-mp0402h-not-spinning-t22119.html

_________________
A backup a day keeps DR away.
Top
 Profile  
 
northwind
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 5th, 2012, 4:29 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3550
Location: Greece
fzabkar wrote:
The solution is very simple if you know how:
samsung-mp0402h-not-spinning-t22119.html


This is a Seagate not a Samsung. Most importantly, this is a 3.5" drive, not a 2.5". You should be aware that these drives have a problem called spindle lock (or seized motor). This has nothing to do with the link you provided and it is definitely not very simple as you present it.

IF the problem of the OP's drive is seized motor (which is 99% on these drives, extremely rare to be stiction), then it is one of the hardest DR operations and can be very costly. Someone with minimal experience can mess this very, very, very badly.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
pcimage
 Post subject: Re: Segate Barracuda Firmware Fix
PostPosted: March 5th, 2012, 7:33 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK
northwind wrote:
fzabkar wrote:
The solution is very simple if you know how:
samsung-mp0402h-not-spinning-t22119.html


This is a Seagate not a Samsung. Most importantly, this is a 3.5" drive, not a 2.5". You should be aware that these drives have a problem called spindle lock (or seized motor). This has nothing to do with the link you provided and it is definitely not very simple as you present it.

IF the problem of the OP's drive is seized motor (which is 99% on these drives, extremely rare to be stiction), then it is one of the hardest DR operations and can be very costly. Someone with minimal experience can mess this very, very, very badly.


Absolutely agree 100% with Northwind, this is NOT a DIY case :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 79 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group