MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
Touchclarity
 Post subject: Loader needed - WD RE WD1602ABKS-70N8A0 (GB0160EAPRR)
PostPosted: June 26th, 2012, 6:44 
Offline
User avatar

Joined: July 21st, 2010, 5:03
Posts: 247
Location: Norfolk, UK
Hi Guys,

Looking for a loader for the above drive, bit of an oddball I know.......but if anyone can help, I'd really appreciate it... :D

F/W HPG0

Many thanks.....

Steve...

_________________
East Anglian Data Recovery Services
http://www.eadr.co.uk

"If it's your only copy - then it's not a backup!"
Top
 Profile  
 
pcimage
 Post subject: Re: Loader needed - WD RE WD1602ABKS-70N8A0 (GB0160EAPRR)
PostPosted: June 27th, 2012, 7:43 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Hi Steve,

You didn't say which version you needed.

Try this one...


>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>Zone allocation table................... : Ok
>Cyl Count............................... : 170
>SA SPT.................................. : 1311
>
>Head number reading..................... : Ok
>Heads number............................ : 1
>
>ROM:
>Flash Dir reading....................... : Ok
>ROM reading............................. : Ok
>ROM Data size........................... : 192 Kb
>ROM version............................. : 05.8VD
>ROM generation.......................... : 05.92D
>Link table version...................... : 04.AH.
>Heads configuration..................... : by map
>Heads number............................ : 1
>Heads number in use..................... : 1
>Switched off heads...................... : No
>Head map................................ : 0
>
>ROM Firmware version.................... : 0005008V
>Service area:
>SA dir reading.......................... : Ok
>SA Copies avalabled..................... : Copy 0
>
>Configuration reading................... : Ok
>Master Password......................... : has not been set
>User Password........................... : has not been set
>
!SA Firmware version..................... : 00050092


Attachments:
11.rar [323.8 KiB]
Downloaded 448 times

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
pcimage
 Post subject: Re: Loader needed - WD RE WD1602ABKS-70N8A0 (GB0160EAPRR)
PostPosted: June 27th, 2012, 7:44 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Or this...

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 1
>Cyl Count............................... : 170
>
>Zone allocation table................... : Ok
>SA SPT.................................. : 1311
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 192 Kb
>ROM version............................. : 05.A8D
>ROM generation.......................... : 05.A9D
>Link table version...................... : 04.AM.
>Consolidated ROM version................ : 000500A8
>
>ROM Modules:
>Flash ROM dir reading................... : Ok (Active)
>Modules directory address............... : 48 285 (24)
>SA regions address...................... : by default
>Heads configuration..................... : by map
>Heads number............................ : 1
>Heads number in use..................... : 1
>Switched off heads...................... : No
>Heads map............................... : 0
>ROM Firmware version.................... : 000500A8
>
>Service area:
>SA dir reading (ID)..................... : Ok
>SA Access............................... : Copy 0,Copy 1
>


Attachments:
11.rar [328.27 KiB]
Downloaded 522 times

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Touchclarity
 Post subject: Re: Loader needed - WD RE WD1602ABKS-70N8A0 (GB0160EAPRR)
PostPosted: June 27th, 2012, 8:48 
Offline
User avatar

Joined: July 21st, 2010, 5:03
Posts: 247
Location: Norfolk, UK
Thanks Sean,

I'll give em a try.... :D

_________________
East Anglian Data Recovery Services
http://www.eadr.co.uk

"If it's your only copy - then it's not a backup!"
Top
 Profile  
 
freakzy
 Post subject: Re: Loader needed - WD RE WD1602ABKS-70N8A0 (GB0160EAPRR)
PostPosted: September 25th, 2012, 10:21 
Offline

Joined: May 1st, 2011, 5:02
Posts: 101
Location: Jakarta, Indonesia
Touchclarity, Did you finish this case ? I got one of these today..... :wink:
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group