MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
sempre
 Post subject: ROM PCB
PostPosted: July 4th, 2012, 23:19 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all! :D

what is the rom? 01 or 02
Please look photo.

pcb donor is compatible? (=model= fw=p/n)
PM...
Thanks!


Attachments:
PCB ST.jpg
PCB ST.jpg [ 177.65 KiB | Viewed 4874 times ]

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: ROM PCB
PostPosted: July 5th, 2012, 5:50 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hi to all! :D

what is the rom? 01 or 02
Please look photo.

pcb donor is compatible? (=model= fw=p/n)pcb bad 100536501 rev A = pcb donor
different processor
PM...
Thanks!


(=model= fw=p/n)pcb bad 100536501 rev A = pcb donor
different processor
PM...

_________________
Нет ничего невозможного
Top
 Profile  
 
Nick_CT
 Post subject: Re: ROM PCB
PostPosted: July 5th, 2012, 7:13 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
I would imagine 01 is ROM IC. What are the markings on both 01 and 02? Can confirm that way.
In my experience it does not matter if the processor is different. LSI vs ST etc.
PCB number must match. Revision does not seem to matter either. REV A works with REV B works with REV C etc

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
sempre
 Post subject: Re: ROM PCB
PostPosted: July 5th, 2012, 8:24 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Nick_CT wrote:
I would imagine 01 is ROM IC. What are the markings on both 01 and 02? Can confirm that way.
In my experience it does not matter if the processor is different. LSI vs ST etc.
PCB number must match. Revision does not seem to matter either. REV A works with REV B works with REV C etc


Thanks reply!!
after switching the flash
busy 100%

Rst 0x20M
ASCII Diag mode

F3 T>/1

F3 1>n1

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:00284F1
Rst 0x20M

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: ROM PCB
PostPosted: July 5th, 2012, 9:22 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Nick_CT wrote:
I would imagine 01 is ROM IC. What are the markings on both 01 and 02? Can confirm that way.
In my experience it does not matter if the processor is different. LSI vs ST etc.
PCB number must match. Revision does not seem to matter either. REV A works with REV B works with REV C etc


Thanks reply!!
after switching the flash
busy 100%

Rst 0x20M
ASCII Diag mode

F3 T>/1

F3 1>n1

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:00284F1
Rst 0x20M


Solved!!
Thanks!

_________________
Нет ничего невозможного
Top
 Profile  
 
einstein9
 Post subject: Re: ROM PCB
PostPosted: July 5th, 2012, 9:33 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2821
Location: Kuwait
Not Difficult as it seems... if you know HOW
Glad to hear that... :wink:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 95 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group