Dear all,
i have accidentally fired my 2TB seagate barracuda hard disk pcb.I have another pcb of Barracuda same pcb number, firm ware, model but the revision is different.
100617465 REV A and fired pcb is 100617465 REV B.
My doubt is whether i can swap the pcb to recover the data.
if i can swap then Should i swap the rom also from fired pcb to the other
please help

Hi, yes you need to swap Rom as well.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

hi mr_spokk,
thanks for your reply..What does the REV A and REV B stands for

Won't matter. PCB's are compatible.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Dear Northwind,
Thank you very much for your reply.

the pcb was actually one from Barracuda green and another from barracuda Lp where model number, firm ware and pcb number are same except for the rev a and rev b and also the site code.

site code and rev was different in both the hard disks.

lot of thanks

Hi

Just try it.
It should work.

PS. If you dont feel comfortable about soldering, have someone skilled to do this for you. ROM's for seagates are unique, if you mess this up, bye-bye data (well, almost).
You also accept the risks of DIY blah blah blah..

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Dear all,

I have swapped the rom. for that purpose i purchased a cheap smd rework station and have sucessfully swapped the rom. now iam in the process of backing up the data.

thank you for all who guided me in this mission

rahul vc

You're welcome.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Good job.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Well done!

DIY has its place, and this is a good example of success.

But this doesn't make every case so.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Even the simple DIY requires some technical ability and investment. No way around it...

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Dear all,

I got an identical pcb for the fired hdd from data pro data recovery Canada. I have send the burnt pcb to them and they have given me a pcb which is cloned. I installed the hdd and found that it's detecting but the size was showing only 8gb instead of 2tb. Could anyone throw light into this?.