MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
Vaidis1973
 Post subject: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 15:44 
Offline

Joined: October 10th, 2012, 13:19
Posts: 9
Location: Kaunas
If i want read any LBA, hdd respond Read error (48-bit) HDD readines timeout (10000) ms.
Check SA all ok, modules can read/write, but user area not readable.
Modules directory address............... : 377 653 (24)
SA regions address...................... : by default

SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Heads map............................... : 0,1,2,5,6,7
ROM Firmware version.................... : 00250012

Service area:
SA dir reading (ID)..................... : Ok
SA Access............................... : Copy 0,Copy 1

Configuration reading................... : Ok
Master Password......................... : has not been set
User Password........................... : has not been set

I search but at this time dont find solution, maybe somebody know that is a problem can be.........
thx
Top
 Profile  
 
Cleanroom
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:21 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 511
Location: Austin, TX
maybe translator
Top
 Profile  
 
Vaidis1973
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:30 
Offline

Joined: October 10th, 2012, 13:19
Posts: 9
Location: Kaunas
31 module- i can read this module, but i'm not sure that he is good.
Top
 Profile  
 
Cleanroom
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:34 
Offline
User avatar

Joined: June 23rd, 2008, 11:26
Posts: 511
Location: Austin, TX
regenerate the translator
Top
 Profile  
 
Vaidis1973
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:38 
Offline

Joined: October 10th, 2012, 13:19
Posts: 9
Location: Kaunas
ok, i try.
sorry if my question stupid :) i novice in data recovery and dont want make more trouble
Top
 Profile  
 
Nick_CT
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:51 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
It could be a bad head.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
pcimage
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 16:55 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Nick_CT wrote:
It could be a bad head.


Bingo! 8)

Or just too weak to allow proper translation initialisation.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Vaidis1973
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 17:00 
Offline

Joined: October 10th, 2012, 13:19
Posts: 9
Location: Kaunas
pcimage wrote:
Nick_CT wrote:
It could be a bad head.


Bingo! 8)

Or just too weak to allow proper translation initialisation.


i.e. SA read/write , but cant read from user area?


Heads test
Cylinder to test........................ : -10
Heads to test........................... : 0,1,2,5,6,7
Head 0.................................. : Ok
Head 1.................................. : Ok
Head 2.................................. : Ok
Head 5.................................. : Ok
Head 6.................................. : Ok
Head 7.................................. : Ok
Top
 Profile  
 
jono-ats
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 10th, 2012, 22:50 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
I agree that sometimes heads test good, but may be too weak to activate the translator.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
Vaidis1973
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 11th, 2012, 6:13 
Offline

Joined: October 10th, 2012, 13:19
Posts: 9
Location: Kaunas
but if weak etc. one or two head i can load loader and read from good head?
Top
 Profile  
 
manhcuongvn
 Post subject: Re: WDC WD20EARS-00MVWB0 read SA, but dont read user area
PostPosted: October 31st, 2012, 1:38 
Offline

Joined: June 6th, 2011, 4:40
Posts: 22
Location: Ha noi
here this solution:
http://www.youtube.com/watch?v=n2ZBjqn1 ... e=youtu.be

_________________
DATA RECOVERY SERVICE VIETNAM
Cứu dữ liệu ổ cứng| Cứu dữ liệu máy chủ |Phục hồi dữ liệu
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group