Hello all,

Need help for module 11 of WD1600AAJS-75M0A0, with info as following

>Techno mode key
>Techno mode key......................... : Ok
>
>RAM:
>HDD Info reading........................ : Ok
>Heads number............................ : 1
>Cyl Count............................... : 170
>
>ROM:
>ROM reading............................. : Ok
>ROM Data size........................... : 192 Kb
>ROM version............................. : 05.F9E
>ROM generation.......................... : 05.F9E
>Link table version...................... : 04.0F.
>Consolidated ROM version................ : 000500F9
>
>ROM Modules:
>Flash ROM dir reading................... : Ok
>Modules directory address............... : FIXED
>SA regions address...................... : by default
>
>SA Translator loading................... : Ok
>
>Heads configuration..................... : by map
>Heads number............................ : 1
>Heads number in use..................... : 1
>Switched off heads...................... : No
>Heads map............................... : 0
>ROM Firmware version.................... : 000500F9
>
I have checked mods from hddguru files section, no match

Thanks,

I have a WDC WD1600AAJS-75WAA0

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Sorry dont have that one

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

pclab, thanks, but it is not compatible.
northwind, no problem. thanks

I'm still searching for this module.

No sorry, only 500F0 and 500FC

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

pcimage, may I try both ?
thanks

Data recovered 100%. Successful case
I have saved and uploaded the SA here : http://files.hddguru.com/download/PC-30 ... 464320.pcr

Good job

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners