MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
mikescorreos
 Post subject: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:46 
Offline

Joined: January 23rd, 2013, 10:36
Posts: 5
Location: surigao city philippines
ST3500418AS turns into ST_M13FQBL after replacing PCB
how will i recover it? do still have a chance to recover my damage hdd? what are the recovery lab here in the philippines.? please help me. pictures and videos there is very much important
Top
 Profile  
 
unknown
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:48 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
You miss something very important to transfer during PCBs changing.
Top
 Profile  
 
mikescorreos
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:51 
Offline

Joined: January 23rd, 2013, 10:36
Posts: 5
Location: surigao city philippines
i did swapping the rom. and nothings i cant. see my hdd on desktop . what are the possibilities cause problem like this
Top
 Profile  
 
unknown
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:53 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Post the patient PCB# and the donor#.
Top
 Profile  
 
mikescorreos
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:56 
Offline

Joined: January 23rd, 2013, 10:36
Posts: 5
Location: surigao city philippines
and also the drive is detected on bios as 0 capacity...
Top
 Profile  
 
unknown
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 10:58 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Is there a strange sounds, or sounds looks normal ?
Top
 Profile  
 
mikescorreos
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 11:01 
Offline

Joined: January 23rd, 2013, 10:36
Posts: 5
Location: surigao city philippines
yup it sounds normal. and spindling . i did also using the HDD regenerator and seagate tools. it detect using that tools but shows up only 3.6 gb out of 500gb... and can't fix it .
Top
 Profile  
 
unknown
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 11:07 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Most likely the drive partially initialized from ROM , also check SATA cables. You will need a pro help.

Good luck.
Top
 Profile  
 
mikescorreos
 Post subject: Re: ST3500418AS turns into ST_M13FQBL after replacing PCB
PostPosted: January 23rd, 2013, 11:13 
Offline

Joined: January 23rd, 2013, 10:36
Posts: 5
Location: surigao city philippines
can a rom damage? after a short circuit made by the board
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group