View topic - Rom chip

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Rom chip

Page 1 of 1

[ 17 posts ]

Previous topic | Next topic

Author

Message

Abdul Rauf

Post subject: Rom chip

Posted: May 28th, 2013, 5:48

Joined: May 6th, 2013, 2:48
Posts: 84

ST3250318AS
Barracuda 7200.12
250 GB

PLEASE guide me where is the (ROM CHIP)on this pcb

Attachments:

PCB.JPG [ 108.82 KiB | Viewed 12518 times ]

Top

michael chiklis

Post subject: Re: Rom chip

Posted: May 28th, 2013, 5:56

Joined: December 5th, 2011, 5:38
Posts: 1754
Location: Verona, Italy

Top left corner chip.
Should be written on it 25P40 or 25X40 or something similar

Attachment:

PCB.JPG [ 81.88 KiB | Viewed 12514 times ]

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

fzabkar

Post subject: Re: Rom chip

Posted: May 28th, 2013, 6:24

Joined: September 8th, 2009, 18:21
Posts: 17223
Location: Australia

http://www.users.on.net/~fzabkar/HDD/HD ... Flash.html
http://www.users.on.net/~fzabkar/HDD/HD ... _Regs.html

_________________
A backup a day keeps DR away.

Top

Abdul Rauf

Post subject: Re: Rom chip

Posted: May 28th, 2013, 7:33

Joined: May 6th, 2013, 2:48
Posts: 84

when i replace the patient's pcb with donor pcb, i also replace the ROM chip of patient pcb the power goes off. hdd has no detection

Top

michael chiklis

Post subject: Re: Rom chip

Posted: May 28th, 2013, 7:35

Joined: December 5th, 2011, 5:38
Posts: 1754
Location: Verona, Italy

What are the original symptoms with the original pcb?
Why do you think that your pcb is faulty?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

Abdul Rauf

Post subject: Re: Rom chip

Posted: May 28th, 2013, 8:05

Joined: May 6th, 2013, 2:48
Posts: 84

PATIENT PCB has no power , it is already dead.
when i replace a patient dead pcb
with donor ok pcb,the hdd power is on,but has no detection.
I replace ROM chip off ok pcb with dead pcb power goes off.

Top

mr_spokk

Post subject: Re: Rom chip

Posted: May 28th, 2013, 8:26

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden

Abdul Rauf wrote:

Then you have a shortcircuit in ROM

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Top

moiz h/d

Post subject: Re: Rom chip

Posted: May 28th, 2013, 8:42

Joined: May 5th, 2013, 14:29
Posts: 94
Location: hdd/myself

i think need a firmware reset with terminal mode

Top

fzabkar

Post subject: Re: Rom chip

Posted: May 28th, 2013, 8:53

Joined: September 8th, 2009, 18:21
Posts: 17223
Location: Australia

Measure the resistance between pin #4 and pin #8 of the flash chip.

Is your photo showing the damaged board or the donor?

_________________
A backup a day keeps DR away.

Top

Abdul Rauf

Post subject: Re: Rom chip

Posted: May 28th, 2013, 9:33

Joined: May 6th, 2013, 2:48
Posts: 84

please Mr fzabkar
see these both pictures of patient & donor pcb & guide me

Attachments:

DONOR.JPG [ 66.09 KiB | Viewed 12462 times ]

PATIENT.JPG [ 59.02 KiB | Viewed 12462 times ]

Top

fzabkar

Post subject: Re: Rom chip

Posted: May 28th, 2013, 15:31

Joined: September 8th, 2009, 18:21
Posts: 17223
Location: Australia

See attachment.

Attachments:

Donor_pin_4_8.jpg [ 17.15 KiB | Viewed 12421 times ]

_________________
A backup a day keeps DR away.

Top

northwind

Post subject: Re: Rom chip

Posted: May 29th, 2013, 4:32

Joined: January 28th, 2009, 10:54
Posts: 3550
Location: Greece

mr_spokk wrote:

Then you have a shortcircuit in ROM

+1
That can be caused by poor soldering too.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

michael chiklis

Post subject: Re: Rom chip

Posted: May 29th, 2013, 4:39

Joined: December 5th, 2011, 5:38
Posts: 1754
Location: Verona, Italy

northwind wrote:

+1
That can be caused by poor soldering too.

Will help using a bit of flux or higher soldering temperature and higher air pressure.
With my soldering station i do it usually at 300° C

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

Abdul Rauf

Post subject: Re: Rom chip

Posted: May 29th, 2013, 5:35

Joined: May 6th, 2013, 2:48
Posts: 84

Mr northwind
see the picture.i have sold the Rom chip accurately.
but the problem remain same

Attachments:

rom chip.JPG [ 127.62 KiB | Viewed 12388 times ]

Top

northwind

Post subject: Re: Rom chip

Posted: May 29th, 2013, 9:47

Joined: January 28th, 2009, 10:54
Posts: 3550
Location: Greece

I'm not sure pin #4 (which by the way involves itself into the power supply) is making good contact.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

fzabkar

Post subject: Re: Rom chip

Posted: May 29th, 2013, 12:21

Joined: September 8th, 2009, 18:21
Posts: 17223
Location: Australia

Wrong chip ...

NTMSD3P102R2, ON Semiconductor, marking E3P102, FETKY P–Channel Enhancement–Mode Power MOSFET & Schottky Diode, Dual SO–8, –3A, –20V, 0.085 ohms:
http://www.onsemi.com/pub/Collateral/NTMSD3P102R2-D.PDF
http://www.datasheetcatalog.org/datashe ... 02R2-D.PDF

_________________
A backup a day keeps DR away.

Top

muhammad shafiq za

Post subject: Re: Rom chip

Posted: September 18th, 2013, 17:31

Joined: December 14th, 2012, 17:53
Posts: 9
Location: karachi

mr_spokk wrote:

Abdul Rauf wrote:

Then you have a shortcircuit in ROM

100% true

Top

Page 1 of 1

[ 17 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 222 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum