MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 2:33 
Offline

Joined: October 15th, 2005, 0:58
Posts: 15
Location: India
Hello,

Seagate drive ST3500413AS
FIRMWARE : JC4B
500 GB , Baracudda 7200.12

On Power on
1. PCB Test ok
2. model no & firmware & LBA shows garbage
ST_M13FOBL , ONR_BFW ,

any one now what could be the problem ?


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 3:49 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
SA cant read, ID you see comes from ROM. At this time there is not enough information to give you any sort of advice. What are the symptoms?


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 3:50 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Serious electrical problem or simply ROM gone.


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 8:51 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
BlackST wrote:
Serious electrical problem or simply ROM gone.

:shock:

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 10:21 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
If it is dead and this is how it ids , I usually see it on heavily/intentionally corrupted ROM or malfunctioning uP...


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 7th, 2013, 10:40 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
BlackST wrote:
If it is dead and this is how it ids , I usually see it on heavily/intentionally corrupted ROM or malfunctioning uP...

PM sent

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 5:30 
Offline

Joined: October 15th, 2005, 0:58
Posts: 15
Location: India
Hello,

Seagate drive ST3500413AS
FIRMWARE : JC4B
500 GB , Baracudda 7200.12

On Power on
1. PCB Test ok
2. Motor Spins
3. Head Try to search , click 12 times
4. Spin Down
5. model no & firmware & LBA shows garbage
ST_M13FOBL , ONR_BFW ,

I have Same model Donor Drive with firmware JC4B .

Can I replace ROM of Donor on Patient PCB & try ???

In case of Seagate drives Can I re-generate ROM using PC3k ???






Report this post


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 5:49 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
I suspect your ROM is fine. Problem is elsewhere.


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 9:05 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Note : had MY experience where the ROM was the culprit but it's not general.
NO YOU CAN'T 'REGENERATE' it with any commercial tool in any case.
So said, if cannot read check media/heads/read channel first, then look at ROM.


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 11:45 
Offline

Joined: October 15th, 2005, 0:58
Posts: 15
Location: India
Hello,

I have a Donor hdd ,
tasks done :
1. Removed patient ROM , checked with Eprom Reader taken backup ,
Placed ROM on Donor working PCB & tried ,
2. Power on -> NO Terminal Access , Motor Spins & same error
Wrong ID , Firmware no & LBA .


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 11:51 
Offline

Joined: October 15th, 2005, 0:58
Posts: 15
Location: India
Hello,

I checked patient ROM file , Open in binary mode , there is text of HDD Serial no , part no & firmware no.
So I assume that Patient ROM might be OK. PCB is also ok , there is no Head Crash noise , Motor Spins
& Search for SA (12 times ) then Spins Down .

DONOR hdd is exact Replica , same PCB & Firmware & model no. , part no.
What could be the problem ?


Top
 Profile  
 
 Post subject: Re: Seagate Error : ST_M13FOBL , FIRMWARE SHOWS : ONR_BFW
PostPosted: August 8th, 2013, 12:53 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
firmware, bad heads, deteriorated media, etc.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group