MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
xsoliman
 Post subject: 7200.12 serial terminal - can't ctrl-Z
PostPosted: October 10th, 2013, 6:19 
Offline

Joined: May 16th, 2009, 9:32
Posts: 325
Location: UNited Kingdom
I'm sure I've read about this before, but cant find the topic
probably under 7200.xx LED issues

I have a couple of working 7200.12's

500GB
can ctrl-Z and get in ok most of the time)
(although sometimes depends if the sata data cable is also connected or not)

1TB
see the Rst 0x20M at power on
but cant get in with ctrl-Z
even if wait a bit

Do you need to do anything special to get in with ctrl-Z

eg shorting the read channel
Top
 Profile  
 
mr_spokk
 Post subject: Re: 7200.12 serial terminal - can't ctrl-Z
PostPosted: October 10th, 2013, 6:27 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Yep, a tweezer Wight be handy :mrgreen:

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
xsoliman
 Post subject: Re: 7200.12 serial terminal - can't ctrl-Z
PostPosted: October 10th, 2013, 6:31 
Offline

Joined: May 16th, 2009, 9:32
Posts: 325
Location: UNited Kingdom
Probably need
viewtopic.php?f=1&t=18907&p=180670&hilit=+7200.12+led#p180670

[Power your hdd with shorting read channels as R0b and bochen415 says like in that image: http://qbhn.neostrada.pl/02.jpg]
Top
 Profile  
 
xsoliman
 Post subject: Re: 7200.12 serial terminal - can't ctrl-Z
PostPosted: October 10th, 2013, 13:21 
Offline

Joined: May 16th, 2009, 9:32
Posts: 325
Location: UNited Kingdom
For info

The half height 1TB has the board shown at http://qbhn.neostrada.pl/02.jpg
ST31000528AS
Firmware: CC38

The third height 500GB has a smaller, rectangular, board
ST3500418AS
Firmware: HP35
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 174 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group