View topic - WD20EARS-00MVWB0 sa access ?

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD20EARS-00MVWB0 sa access ?

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

raven4d

Post subject: WD20EARS-00MVWB0 sa access ?

Posted: January 15th, 2014, 7:16

Joined: August 16th, 2012, 4:57
Posts: 324

Good morning ..

i have this
WDC WD20EARS-00MVWB00AB51
it's sadle G6

the drive had sa problems , head tests ok .

tried to refresh the sa area, so i took an original copy of the rom+rom modules+ modules + tracks ..

format sa , ok

now i can't access to the sa area to rewrite the mods or tracks , am using DFL

rewrite mod 1 and 35 failed !!

and am not able to write any mod or track ..

any idea will be appreciated ..

thanks

Top

waqas_ali766

Post subject: Re: WD20EARS-00MVWB0 sa access ?

Posted: January 15th, 2014, 8:23

Joined: July 6th, 2013, 15:13
Posts: 311
Location: ISLAMABAD

first try to upload ata overlay 11 number module in ram . then upload 01 to rom .
then open module directory then upload 01 and 35 then reset power
now again connect hdd . now upload module 11 in ram . then open module directory and upload all modules .
if u not upload 11 module to ram ,u cannot access sa.
its permanant overlay module

Top

raven4d

Post subject: Re: WD20EARS-00MVWB0 sa access ?

Posted: January 15th, 2014, 12:43

Joined: August 16th, 2012, 4:57
Posts: 324

waqas_ali766 wrote:

thank you for the hint ..

am aware of this method , but , u can't upload a mod to ROM , there are onlly two new options in the new dfl program

upload modules dir to RAM and upload a module to RAM

and even after uploading 01 to RAM am still unable to access SA , and not able to write modules neither by id nor by aba

i would appreciate if u can take a look by teamviewer

Top

BGman

Post subject: Re: WD20EARS-00MVWB0 sa access ?

Posted: January 15th, 2014, 14:28

Joined: September 30th, 2005, 7:33
Posts: 849

What is the firmware revision of your drive?
There are two groups of F/W and the approuch should be different for each one of them.

Top

raven4d

Post subject: Re: WD20EARS-00MVWB0 sa access ?

Posted: January 15th, 2014, 15:27

Joined: August 16th, 2012, 4:57
Posts: 324

it's

WDC WD20EARS-00MVWB0_51.0AB51_WD-WCAZAA437245_00200084_1980_256

Top

raven4d

Post subject: Re: WD20EARS-00MVWB0 sa access ?

Posted: January 17th, 2014, 7:48

Joined: August 16th, 2012, 4:57
Posts: 324

Spildit wrote:

raven4d wrote:

Did you try hot swap ?
Bad sectors might have been found while doing the SA format, correct ? If so it might afect ROM module containing sa translator/defects.
I have never tested with this and sadle is a pain... If you do the hot swap the defects on the donnor sa will be diferent so most likely will not work either...
Interesting, interesting !
More testing is required.
The more i learn DR the more i realize how little i know...

thanks for the answer ..
indeded sadle is a pain ..

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 151 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum