MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: HELP! WD Elements 1048 2TB drive suddenly becomes uninitiali
PostPosted: January 17th, 2014, 3:57 
Offline

Joined: January 17th, 2014, 3:38
Posts: 1
Location: Philippines
The Drive was working fine until the laptop properly restarted, then the drive became uninitialized.

Already tried recovering the Partition but the drive can't be formatted. Also tried initializing the drive but it fails due to an I/O error. The drive can be detected/recognized thru HD Sentinel, UVCview, Remo Recover and Stellar Phoenix Recovery and the USB device manager in Windows.
The Drive contains important media files so even if its under warranty, I cant swap it for a replacement.

Hope I posted this on the Right discussion and hoping to get help asap. Thanks and God Bless!


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 17th, 2014, 5:50 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
sevenzero wrote:
The Drive contains important media files
sevenzero wrote:
Already tried recovering the Partition but the drive can't be formatted
sevenzero wrote:
Also tried initializing the drive but it fails

:shock:

Why are you trying to format/initialize a drive that contains important files?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 17th, 2014, 7:31 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
Because, unlike when we started in computers and got thick manuals explaining every single executable on the system, and sometimes a circuit diagram, now the user has been so far abstracted from the computer they don't understand what is going on. If Windows tells them to format, that's what they'll do.

The first error is assuming the drive was working fine until windows restarted. Just because the PC was working does not mean it was not about to fail.

The help you need is in the form of a data recovery firm, else the files are really NOT all that important.


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 20th, 2014, 9:35 
Offline

Banned User

Joined: August 13th, 2013, 4:16
Posts: 26
Location: Pakistan
Give me your email I will send you data recovery software to recover your files.


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 20th, 2014, 11:03 
Offline

Banned User

Joined: August 13th, 2013, 4:16
Posts: 26
Location: Pakistan
He said " The drive can be detected/recognized thru HD Sentinel, UVCview, Remo Recover and Stellar Phoenix Recovery and the USB device manager in Windows." So its means drive had only logical problem. which can be solved with any professional data recovery software... If firmware or bad head issue the drive can't pass the system bios. So you try to relode firmware if drive can be detected/recognized thru HD Sentinel,. You are confusing us or may be you don't understand English very well!! and then you are saying I am playing with my clients!! keep your words good to me! and I don't recommend my service to you I just want to help him as free... and now you want to get the case to earn money don't try to bother us.


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 20th, 2014, 11:51 
Offline

Banned User

Joined: August 13th, 2013, 4:16
Posts: 26
Location: Pakistan
You did not understand the case and you only want to prove that you are No.1 in data recovery.

My Friend this is WD Element may be a USB external hard drive their is some new error coming which currently I am working on but this is not a firmware or head problem.

It is only a boot sector error.

And I know much about data recovery.


Top
 Profile  
 
 Post subject: Re: HELP! WD Elements 1048 2TB drive suddenly becomes uninit
PostPosted: January 20th, 2014, 15:26 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
sevenzero wrote:
The drive can be detected/recognized thru HD Sentinel, UVCview, Remo Recover and Stellar Phoenix Recovery and the USB device manager in Windows.

The enclosure contains a USB-SATA bridge board. It appears that your software is detecting this board but not the actual drive behind the bridge.

What exactly do UVCView and HD Sentinel tell you?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 292 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group