MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
ecmbrepair
 Post subject: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 21st, 2014, 2:32 
Offline
User avatar

Joined: December 25th, 2007, 13:35
Posts: 4
Location: NAGPUR
HELP ST500DM002-KC45 NOT READ AFTER 27 % .
FIRST IT WAS GIVING BUSY.
I AM USING DDI4.


Attachments:
k45-1.JPG
k45-1.JPG [ 51.53 KiB | Viewed 5045 times ]
Top
 Profile  
 
mr_spokk
 Post subject: Re: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 21st, 2014, 3:49 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Looks like bad translator to me...have you performed any regeneration?

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
ecmbrepair
 Post subject: Re: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 21st, 2014, 4:30 
Offline
User avatar

Joined: December 25th, 2007, 13:35
Posts: 4
Location: NAGPUR
I DID THIS
m0,2,2,0,0,0,0,22
Top
 Profile  
 
michael chiklis
 Post subject: Re: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 21st, 2014, 5:08 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
BAD MOVE.
This drive has NRG list, with command m0,2,2,,,,,22 NRG wasn't taken in account so now you have partial access to sectors.
Sector 03B6B75F (HEX) is sector 62306143 (decimal), this means that from LBA 62.306.143 to last LBA you don't have anymore access (assuming that 03B6B75F is the first sector on which you get error in terminal).

Do you have pc3000 or HD Doctor?
With those you can rebuild NRG and get again access to sectors, then you can continue to clone with DDI

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
ecmbrepair
 Post subject: Re: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 23rd, 2014, 0:36 
Offline
User avatar

Joined: December 25th, 2007, 13:35
Posts: 4
Location: NAGPUR
I do not have anything like pc3000 or HD DOCTOR. My client can pay only 5000 RS. I WANT TO OUTSOURCE THIS JOB IN INDIA ONLY.
Top
 Profile  
 
michael chiklis
 Post subject: Re: HELP ST500DM002-KC45 NOT READ AFTER 27 %
PostPosted: March 23rd, 2014, 14:13 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
Sorry, if you don't have professional tools then you can't do much to get data from this drive
:(

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group