MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
ontariotech
 Post subject: How does use of a damaged drive affect the firmware?
PostPosted: August 23rd, 2014, 14:49 
Offline

Joined: March 8th, 2009, 15:41
Posts: 88
Location: Hiding Between the Platters
How does use of a damaged drive (e.g. bad heads) affect the firmware?

For example, will using a drive with a damaged head eventually lead to corrupt firmware as well?
Top
 Profile  
 
hhddrec
 Post subject: Re: How does use of a damaged drive affect the firmware?
PostPosted: August 25th, 2014, 6:09 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World
Is not recomended to use damaged heads, because can damage media and FW.
Top
 Profile  
 
ontariotech
 Post subject: Re: How does use of a damaged drive affect the firmware?
PostPosted: September 1st, 2014, 15:50 
Offline

Joined: March 8th, 2009, 15:41
Posts: 88
Location: Hiding Between the Platters
ok thanks hhddrec.

Does anyone else have anything to say on this?

Does firmware get damaged by using a faulty drive?
Top
 Profile  
 
mr_spokk
 Post subject: Re: How does use of a damaged drive affect the firmware?
PostPosted: September 1st, 2014, 16:23 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Yes, it builds up a large defect list and could overflow it to the point that the drive will not start.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
guru
 Post subject: Re: How does use of a damaged drive affect the firmware?
PostPosted: September 2nd, 2014, 13:38 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2782
Location: England
Main problem comes from the drives inability to write back critical dynamic firmware modules , (If the firmware resides on a surface with damaged head/s)

_________________
All went well until I plugged the drive in.
Top
 Profile  
 
hhddrec
 Post subject: Re: How does use of a damaged drive affect the firmware?
PostPosted: September 3rd, 2014, 5:21 
Offline
User avatar

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World
smart words here.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 219 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group