View topic - can someone help me with my reports?

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

can someone help me with my reports?

Page 1 of 1

[ 10 posts ]

Previous topic | Next topic

Author

Message

carlocki

Post subject: can someone help me with my reports?

Posted: September 25th, 2014, 15:00

Joined: September 25th, 2014, 14:14
Posts: 5
Location: Roma, Italy

can someone told me if this reports are corrects please?

Top

Dmitri

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 15:50

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/

carlocki wrote:

can someone told me if this reports are corrects please?

They look perfectly fine to me.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.

Last edited by Dmitri on September 25th, 2014, 15:52, edited 1 time in total.

Top

carlocki

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 15:51

Joined: September 25th, 2014, 14:14
Posts: 5
Location: Roma, Italy

a disk give me error input parameters disk

and the smart

199 UltraDMA CRC Error Count 200 057 00000000-53C7 000

Top

Dmitri

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 16:05

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/

carlocki wrote:

199 UltraDMA CRC Error Count 200 057 00000000-53C7 000

Growing C7 attribute usually indicates an interface problem of some kind.

Most likely that means a cable is better to be replaced. Also could be PCI/PCI-E bus overclocking or bad contact at SATA connector on drive or motherboard/controller.

First error sounds a bit strange to me, but can be a result of the OS switching channel mode to PIO.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.

Top

fzabkar

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 16:09

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

If the drive has a jumper to limit the SATA link rate, then try that.

_________________
A backup a day keeps DR away.

Top

carlocki

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 16:15

Joined: September 25th, 2014, 14:14
Posts: 5
Location: Roma, Italy

Dmitri wrote:

carlocki wrote:

can someone told me if this reports are corrects please?

They look perfectly fine to me.

sorry I cannot upload it

how can I do that?

Top

fzabkar

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 17:24

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

Copy the results to the clipboard in text mode and paste them into your next post. Use the "code" style button for proper formatting.

IMO CrystalDiskInfo provides a much friendlier and more logical output format (Text Copy).

_________________
A backup a day keeps DR away.

Top

carlocki

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 17:38

Joined: September 25th, 2014, 14:14
Posts: 5
Location: Roma, Italy

Top

carlocki

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 17:41

Joined: September 25th, 2014, 14:14
Posts: 5
Location: Roma, Italy

I tried this

Top

fzabkar

Post subject: Re: can someone help me with my reports?

Posted: September 25th, 2014, 18:24

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

Try installing the OPT1 jumper.

http://www.wdc.com/en/library/eide/2579-001037.pdf

_________________
A backup a day keeps DR away.

Top

Page 1 of 1

[ 10 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 86 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum