View topic - Integrated USB Board Issue

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Integrated USB Board Issue

Page 1 of 1

[ 11 posts ]

Previous topic | Next topic

Author

Message

ddrecovery

Post subject: Integrated USB Board Issue

Posted: October 17th, 2014, 21:38

Joined: June 11th, 2013, 17:01
Posts: 1772
Location: Phoenix, AZ USA

Seem to be overrun by these type of drives recently. I have a WD10TMVW thats very slow to respond. It has board board 2060-771737-00 (image attached). I have a matching SATA board 2060-771820-000 Controller number) and have swapped the U12 chip. The drive does not spin up, but the board comes RDY and I can see the ROM information to presume the ROM swap worked. Any advice.

Attachments:

2060_771737_000.jpg [ 996.83 KiB | Viewed 7705 times ]

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Top

fzabkar

Post subject: Re: Integrated USB Board Issue

Posted: October 17th, 2014, 23:03

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

771820 has a different motor controller (Nautilus):
http://ep.yimg.com/ay/yhst-144375849714 ... 2601-1.gif

2060-771737 has an SH6601AF.

_________________
A backup a day keeps DR away.

Top

ddrecovery

Post subject: Re: Integrated USB Board Issue

Posted: October 18th, 2014, 0:23

Joined: June 11th, 2013, 17:01
Posts: 1772
Location: Phoenix, AZ USA

Thank you fzabkar, learning, learning learning.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Top

hpw333

Post subject: Re: Integrated USB Board Issue

Posted: October 18th, 2014, 1:02

Joined: December 29th, 2011, 2:11
Posts: 190
Location: egypt

use 1692-005 sata pcb

_________________
http://www.hpwlab.com

Top

ddrecovery

Post subject: Re: Integrated USB Board Issue

Posted: October 18th, 2014, 1:26

Joined: June 11th, 2013, 17:01
Posts: 1772
Location: Phoenix, AZ USA

hpw333 wrote:

use 1692-005 sata pcb

Thanks, I will look that one up.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Top

ddrecovery

Post subject: Re: Integrated USB Board Issue

Posted: October 22nd, 2014, 13:01

Joined: June 11th, 2013, 17:01
Posts: 1772
Location: Phoenix, AZ USA

That board worked fine and can get into the drive to work on it. One more question, I presume I can image the drive (DDI) to a SATA drive and then use a WD Bridge Board to decrypt? I guess I could by a matching donor drive, image to that, swap the ROM over and we would be good. But they are currently running at $250. Do you know a bridge board number that would decrypt the imaged drive? My drive has Symwave SW6316 3VB14.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Top

Mikippp

Post subject: Re: Integrated USB Board Issue

Posted: October 22nd, 2014, 13:52

Joined: May 30th, 2005, 17:07
Posts: 542

Hi,
PCB 4060-705089-001

Mikippp

Top

data-medics

Post subject: Re: Integrated USB Board Issue

Posted: October 22nd, 2014, 14:57

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI

You can use WD My Book board 4061-705089-001 to decrypt that one.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

Top

data-medics

Post subject: Re: Integrated USB Board Issue

Posted: October 22nd, 2014, 15:01

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI

Didn't see that someone else already responeded. LOL.

By the way if you have PC-3000 the latest version of DE can now software decrypt on the fly. Almost eliminates the need for DDI4 w/ USB addon for these Pasports.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

Top

hdd_sand

Post subject: Re: Integrated USB Board Issue

Posted: October 22nd, 2014, 16:26

Joined: January 29th, 2009, 11:23
Posts: 248
Location: SXSW

data-medics wrote:

By the way if you have PC-3000 the latest version of DE can now software decrypt on the fly. Almost eliminates the need for DDI4 w/ USB addon for these Pasports.

data-medics, I have a question for you, I have a WD my passport that came in with Smartware locked, client claims no password was set, if I convert to sata and clone it to another WD do you think the new DE will be able to decrypt? I haven't go the update so I dont have a way to test it right now, thank you

Top

ddrecovery

Post subject: Re: Integrated USB Board Issue

Posted: October 23rd, 2014, 15:25

Joined: June 11th, 2013, 17:01
Posts: 1772
Location: Phoenix, AZ USA

Thanks Everyone :-)

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Top

Page 1 of 1

[ 11 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 214 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum