View topic - ST2000DM001 BUSY

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST2000DM001 BUSY

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

databack

Post subject: ST2000DM001 BUSY

Posted: January 14th, 2015, 7:49

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan

Hi

Anyone can solve this error?LED:000000BB FAddr: 00004254
No any other error and echo that.
Busy and no clicking sound.
Can not go to T level...

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir

Top

lcoughey

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 9:00

Joined: February 9th, 2009, 16:13
Posts: 2574
Location: Ontario, Canada

Usually heads and/or fatal surface damage with my experience.

_________________
Luke
Recovery Force Data Recovery

Top

databack

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 9:14

Joined: February 13th, 2014, 12:13
Posts: 166
Location: Isfahan

I don't think about head damage...
MRT engineer says FW format and no solution for that!

_________________
Phoenix Computer Forensic Laboratory
http://www.databack.ir

Top

hddguy

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 9:20

Joined: November 9th, 2006, 15:15
Posts: 2984

For this you should see T> before LED error. I think probably it is related to MC

Top

ROb

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 9:31

Joined: April 16th, 2008, 4:50
Posts: 264

Totally Agree with hddguy.

Top

galaxy

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 11:27

Joined: January 31st, 2014, 8:46
Posts: 242
Location: India

F3 2>U
Spin Up Complete
F3 T3>/1
F3 1>N1
F3 1>/
F3 T>m0,2,2,0,0,0,0,22
and wait until you'll get message
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = 0000
.....
User Partition Format Successful - Elapsed Time 0 mins 05 secs

Top

shahij

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 11:34

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh

galaxy wrote:

Don't guide to kill!

In this regard it should be bad sector on SA!

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com

Top

Dmitri

Post subject: ST2000DM001 BUSY, LED:000000BB

Posted: January 14th, 2015, 13:46

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/

databack wrote:

Anyone can solve this error? LED:000000BB FAddr:00004254

Post not just an error, but a complete output which you get after powering the drive up.

The error above means that drive sees servolabels, reads the SA, but unable to find necessary information in it (overlay).

As for FW format, it's done using a special techno command. After format it's possible to pass through such error, drive will get detected, return its passport and so on, but there will be no access to user area.

If you can get only one module (P-list), that will be enough to make this job recoverable.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.

Top

lcoughey

Post subject: Re: ST2000DM001 BUSY

Posted: January 14th, 2015, 14:35

Joined: February 9th, 2009, 16:13
Posts: 2574
Location: Ontario, Canada

Seagate supposedly will do this for a $499 flat rate. Send it to them and let them figure it out.

_________________
Luke
Recovery Force Data Recovery

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], Pi0tR and 72 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum