MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 8:12 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
Hi,
This drive is detected by BIOS, but very slow. Once computer boots, DMDE/Find and Mount will see it, and I was able to start imaging it.

Imaging was VERY slow, started last night at 11pm and stopped it today at 6pm for a total of 16GB of the image copied.. would have taken 62 days at that rate.

Terminal shows only:
Code:
Rst 0x20M
RW: Disc Ctlr Initialization Completed.

SATA Reset


Doesn't make any nasty sounds.

This drive was replaced by Dell under warranty. Owner needs to send it back probably tomorrow, or if I can do anything, maybe stall a smidge, but they aren't going to do any pro DR. I only wanted to take a look as it isn't the standard bell ringing for lunch sound, and it belongs to a colleague in Edu sector.

Can anyone suggest anything I might be able to try?

Thanks in advance


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 8:26 
Offline

Joined: March 20th, 2010, 4:34
Posts: 256
Location: Turkey
speed is same in reverse imaging as well ?

_________________
RAID/Server Recovery


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 8:41 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
cant get into terminal to do so. Remember Spildit, Im not a HDD Guy, so what you said is like telling someone when the car doesn't start to go check the engine :) ;)

I can work out how to stop reallocation from whats already posted on the forums I reckon.

edit: you wouldn't believe it, after posting I thought I would check terminal again and now get F3 prompt. doh!


Last edited by HaQue on May 19th, 2015, 8:47, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 8:49 
Offline

Joined: May 6th, 2015, 6:31
Posts: 60
Location: Earth
Background processes. Need to edit SA.


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 9:09 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
Quote:
ASCII Diag mode

F3 T>.

Current R/W User LBA 000000000000 LLL CHS 000000.0.0000 PLP CHS 000000.0.0000
R/W Status 1 R/W Error 00000080 Ready


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 9:22 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
Suitsof wrote:
Background processes. Need to edit SA.


ok, so just let them return it to dell them?


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 10:16 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
I disabled realloc and it started to image quickly, first 2 partitions were fine, but at LBA 23,804,065 got CRC error, and would not copy any data. Of course this is basically where the user 988GB Partition is. I guess that's that.
Thanks guys, pity I couldn't have given it to a pro, may not have been a hard one.


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 10:33 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
what about reverse imaging as chinopk mentioned above ?


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 19:47 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
jermy wrote:
what about reverse imaging as chinopk mentioned above ?


Reverse imaging just had CRC error straight away.

From memory there is a 40 odd MB partition, a 12GB and the 988GB. seems the first 2 image ok, though I don't know why the CRC errors would be divided by partition.


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 20:05 
Offline

Joined: December 6th, 2012, 8:49
Posts: 291
Location: espaƱa
HaQue wrote:
though I don't know why the CRC errors would be divided by partition.


988gb encrypted partition or protected


Top
 Profile  
 
 Post subject: Re: ST31000524AS JC4A 7200.12
PostPosted: May 19th, 2015, 21:46 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3903
Location: Adelaide, Australia
Interesting thought. I know the users wouldn't know anything about encryption, and this was out of a regular desktop. I am sure these are regular users running windows. I am not sure what encryption could be here, no evidence of it.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 78 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group