This is very common error. My data is important.
How can i recover data? File systems is raw now.
And sectors cannot read.
and windows says " Wrong Parameter"..
You can see that picture.

Have to determine the points of failure first and then carry on with the appropriate solution(s). Need to test firmware, read-write mechanism, more than likely software imaging will fail. So, a lot of work and proper equipment needed to recover the data.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Given that it gives a "few clicks" there is a reasonable chance that one of the read/write heads has failed.

If this is the case and you continue to run the drive with a bad head in there, sooner or later (more likely sooner rather than later) it could well crash catastrophically, taking your data with it.

At least get it analysed by a DR pro before proceeding any further..

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

+1

also running DR software on failing drive is not a good idea at all.

_________________
RAID/Server Recovery

+1 @pcimage