View topic - Help ! Hitachi PCB issue

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Help ! Hitachi PCB issue

Page 1 of 1

[ 13 posts ]

Previous topic | Next topic

Author

Message

raven4d

Post subject: Help ! Hitachi PCB issue

Posted: May 21st, 2015, 16:53

Joined: August 16th, 2012, 4:57
Posts: 324

Greetings friends .

i would like to ask you for your professional opinion in this HDD .

Hitachi travelstar

model : HTS541060G9SA00
size 60 GB

drive is not spinning up at all ... below is a snapshot of the pcb hopefully it can tell it's story ..

nothing that the fuse and the near by resistor test OK , and no burm marks at all on any component ..

thank you in advance

Attachments:

11356173_10153396414367125_2071361099_n.jpg [ 125.86 KiB | Viewed 8918 times ]

Top

jermy

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 21st, 2015, 18:16

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal

have you checked the status of PUIS ?

Top

pcimage

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 22nd, 2015, 4:34

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Usually it's the fuse at F1 that blows, but if you've checked that then I would transfer the NVRAM @ U6 to another compatible PCB.

If you can't find a PCB with same ROM version as yours, you'll have to switch ROM @ U3 too.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

raven4d

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 22nd, 2015, 4:47

Joined: August 16th, 2012, 4:57
Posts: 324

Good morning ,

thank you for the precious replies ..

unfortunately i didnt manage to get any donor PCB , although i have tons of scrap HDDs .. but luck can still play a great role ..

Top

northwind

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 22nd, 2015, 10:01

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece

Did you check fuse at F1, as pcimage suggested?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

Amarbir[CDR-Labs]

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 22nd, 2015, 12:51

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

raven4d wrote:

Raven4d,
Are You From india .Let Me Know i can check my stock and let you know if i have this .Please Post Photo of HDD top cover also and the other side of this pcb

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

raven4d

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 23rd, 2015, 3:51

Joined: August 16th, 2012, 4:57
Posts: 324

Hello again

the fuse and the 0 OHM resistor are OK

nop! India is almost 1400 Km away ..

Top

pcimage

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 23rd, 2015, 4:10

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Post a photo of the other side of the PCB and I'll check if I have a suitable one here.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Amarbir[CDR-Labs]

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 23rd, 2015, 4:40

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

raven4d wrote:

Hello again

the fuse and the 0 OHM resistor are OK

nop! India is almost 1400 Km away ..

Sir ,
Please Post a Photo of Other Side As stated By Sean and Asked By Me

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

raven4d

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 24th, 2015, 6:27

Joined: August 16th, 2012, 4:57
Posts: 324

Greetings

please find below a photo of the backside of the PCB

can someone who has the very same mode be kind to test the resistance between the motor pins ? now am suspecting a motor burn ?

Attachments:

11356346_10153403106897125_1810540961_n.jpg [ 91.5 KiB | Viewed 8718 times ]

Top

raven4d

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 29th, 2015, 9:44

Joined: August 16th, 2012, 4:57
Posts: 324

well, after testing a non compatible PCB , the drive spins up and no clicks , so i presume now am sure that it's a pcb related issue ...

Top

jermy

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 29th, 2015, 9:57

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal

raven4d wrote:

unfortunately i didnt manage to get any donor PCB

http://www.ebay.com/itm/360755858208

Top

raven4d

Post subject: Re: Help ! Hitachi PCB issue

Posted: May 29th, 2015, 15:12

Joined: August 16th, 2012, 4:57
Posts: 324

thank you very much , am aware of the availabillity of the pcb on the internet , but the thing is , for my country , it's not easy to pay and ship to , from internet .. this is why am struggeling with it ..

Top

Page 1 of 1

[ 13 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 240 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum