View topic - WD2500BMVS

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

WD2500BMVS

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

jerovsek

Post subject: WD2500BMVS

Posted: June 9th, 2015, 3:52

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija

Hello,

I receive drive for datarecovery.

First drive not start at all. Then I clean all contacts. After that, drive start producing sounds like sirene( 5 times) and stop.
Drive is detected as Venus family, without model and size.

Top

northwind

Post subject: Re: WD2500BMVS

Posted: June 9th, 2015, 4:46

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece

Is that a client's drive?

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

Top

jerovsek

Post subject: Re: WD2500BMVS

Posted: June 9th, 2015, 4:57

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija

yes it's client drive

Attachments:

wd.zip [155.98 KiB]
Downloaded 270 times

Top

hhddrec

Post subject: Re: WD2500BMVS

Posted: June 9th, 2015, 5:47

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World

Are you take a look inside case?

Top

jerovsek

Post subject: Re: WD2500BMVS

Posted: June 10th, 2015, 1:22

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija

Techno mode key
Techno mode key......................... : Ok

Debug Stop Code......................... : DEBUGSTOP CRT RAISE

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 1
Cyl Count............................... : 128

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 08.8WA
ROM F/W version......................... : 0008008W
Overlay F/W version..................... : 08.8WA
Servo F/W version....................... : 01.91

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3

Read ROM
Into file............................... : <HDD Profile>\Data\ROM\ROM_0008008W.bin
ROM Data size........................... : 192 Kb
Ok

Read ROM modules
Into file............................... : <HDD Profile>\Data\ROM
Module : 0A............................. : Ok
Module : 0B............................. : Ok
Module : 30............................. : Ok
Module : 47............................. : Ok
Module : 0D............................. : Ok
Module : 4F............................. : Ok

Top

pcimage

Post subject: Re: WD2500BMVS

Posted: June 10th, 2015, 2:53

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

Physical issue I would imagine.

Heads damaged/bad/stuck/mangled I would guess.

Either way, not DIY :-(

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Suitsof

Post subject: Re: WD2500BMVS

Posted: June 10th, 2015, 9:22

Joined: May 6th, 2015, 6:31
Posts: 60
Location: Earth

Problem with head (s).

Top

hhddrec

Post subject: Re: WD2500BMVS

Posted: June 10th, 2015, 10:03

Joined: August 13th, 2008, 13:10
Posts: 811
Location: World

hhddrec wrote:

Are you take a look inside case?

I ask because i think the same as pcimage

pcimage wrote:

Heads damaged/bad/stuck/mangled I would guess.

Either way, not DIY :-(

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 224 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum