MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
mikail13
 Post subject: Useles TVS changes in Seagate ST3000DM001
PostPosted: August 9th, 2015, 16:41 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
because of Wrong Adapter TVS diodes burn in ST3000DM001.

i repair it.
drive spins. head moves. after that suddenly stops.


I've never encountered such a problem.

Why it stops?
Top
 Profile  
 
labtech
 Post subject: Re: Useles TVS changes in Seagate ST3000DM001
PostPosted: August 11th, 2015, 23:16 
Offline

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA
What exactly did the repair entail? If used adaptives swap on a donor PCB, then it is possible the solder is weak and ROM is not connecting well. If this is not the problem, then there could have been other subsequent issues along with the original TVS failure, such as motor winding failure, preamp failure, etc.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts
Top
 Profile  
 
digisupport
 Post subject: Re: Useles TVS changes in Seagate ST3000DM001
PostPosted: August 12th, 2015, 1:28 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 627
Location: Kolding | Denmark
Dead preamp or more pcb damage.

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
mikail13
 Post subject: Re: Useles TVS changes in Seagate ST3000DM001
PostPosted: August 12th, 2015, 3:51 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
labtech wrote:
What exactly did the repair entail? If used adaptives swap on a donor PCB, then it is possible the solder is weak and ROM is not connecting well. If this is not the problem, then there could have been other subsequent issues along with the original TVS failure, such as motor winding failure, preamp failure, etc.


i only desolder burnt TVS diode.
no swap.

drive spins. mobo sees hdd and suddenly stops.
Top
 Profile  
 
chinopk
 Post subject: Re: Useles TVS changes in Seagate ST3000DM001
PostPosted: August 12th, 2015, 5:56 
Offline

Joined: March 20th, 2010, 4:34
Posts: 256
Location: Turkey
digisupport wrote:
Dead preamp or more pcb damage.


+1

_________________
RAID/Server Recovery
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: michael chiklis and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group