MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 
  Previous topic | Next topic 
Author Message
sempre
 Post subject: DISASTER ROCOVERY
PostPosted: September 29th, 2015, 15:14 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
Hi to all!
flash rom good that the chances of successful recovery of data from these HDDs?
:?


Attachments:
hd2 open.jpg
hd2 open.jpg [ 250.48 KiB | Viewed 7976 times ]
Hd1_ open.jpg
Hd1_ open.jpg [ 214.96 KiB | Viewed 7976 times ]

_________________
Нет ничего невозможного
Top
 Profile  
 
jermy
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 29th, 2015, 15:43 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
is this HDD lying on your kitchen table in the open (no clean environment) ?
Top
 Profile  
 
sempre
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 29th, 2015, 15:48 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
jermy wrote:
is this HDD lying on your kitchen table in the open (no clean environment) ?


Class 100

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 29th, 2015, 15:50 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
jermy wrote:
is this HDD lying on your kitchen table in the open (no clean environment) ?


Class 100


this HDDs burned due to a fire!
the spacers and filters this melted due to the heat!

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 30th, 2015, 8:43 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hi to all!
flash rom good that the chances of successful recovery of data from these HDDs?
:?


Attachments:
HDD1 and 2 LABEL.jpg
HDD1 and 2 LABEL.jpg [ 292.9 KiB | Viewed 7898 times ]

_________________
Нет ничего невозможного
Top
 Profile  
 
sempre
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 30th, 2015, 8:43 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
sempre wrote:
Hi to all!
flash rom good that the chances of successful recovery of data from these HDDs?
:?

_________________
Нет ничего невозможного
Top
 Profile  
 
Izualim
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 30th, 2015, 9:36 
Offline
User avatar

Joined: May 9th, 2012, 7:55
Posts: 121
Location: Western Europe
hello sempre, we had recovered drives like that, but it's hard to know if it's still recoverable or not, WD's are not as sentisitive in platter alignment as seagates, perhaps you can give it a try.
Top
 Profile  
 
Leo
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 30th, 2015, 11:00 
Offline

Joined: April 12th, 2006, 8:18
Posts: 32
Location: Chicago, USA
Check VCM magnet. If it still works, you have a chance. If not, platters most likely are demagnetized as well.
Top
 Profile  
 
colanco
 Post subject: Re: DISASTER ROCOVERY
PostPosted: September 30th, 2015, 15:17 
Offline

Joined: December 6th, 2012, 8:49
Posts: 291
Location: españa
Leo wrote:
Check VCM magnet. If it still works, you have a chance. If not, platters most likely are demagnetized as well.



The magnets can lose their properties at high temperatures (although recover once the temperature drops)

I do not understand that your relationship to data recorded on plates.
Top
 Profile  
 
Izualim
 Post subject: Re: DISASTER ROCOVERY
PostPosted: October 1st, 2015, 3:11 
Offline
User avatar

Joined: May 9th, 2012, 7:55
Posts: 121
Location: Western Europe
Leo wrote:
Check VCM magnet. If it still works, you have a chance. If not, platters most likely are demagnetized as well.

+1

Magnets loss their magnetic properties when you apply high temperature for long period of time, if indeed magnet has lost some magnetic property case is lost.
Top
 Profile  
 
northwind
 Post subject: Re: DISASTER ROCOVERY
PostPosted: October 1st, 2015, 4:37 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
Izualim wrote:
Leo wrote:
Check VCM magnet. If it still works, you have a chance. If not, platters most likely are demagnetized as well.

+1

Magnets loss their magnetic properties when you apply high temperature for long period of time, if indeed magnet has lost some magnetic property case is lost.


+2

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
sempre
 Post subject: Re: DISASTER ROCOVERY
PostPosted: October 1st, 2015, 8:13 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 1060
northwind wrote:
Izualim wrote:
Leo wrote:
Check VCM magnet. If it still works, you have a chance. If not, platters most likely are demagnetized as well.

+1

Magnets loss their magnetic properties when you apply high temperature for long period of time, if indeed magnet has lost some magnetic property case is lost.


+2


Sorry, but lost its magnetic capacity :shock:

Thanks all reply!!

some hope to have the data back?

all information will be welcome! :mrgreen:

_________________
Нет ничего невозможного
Top
 Profile  
 
jermy
 Post subject: Re: DISASTER ROCOVERY
PostPosted: October 1st, 2015, 12:28 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
Most likely even if you do retrieve some data it will be partial and mostly corrupted, but you'll never know until you try.
Top
 Profile  
 
Dmitri
 Post subject: DISASTER RECOVERY - hard drive after fire
PostPosted: October 3rd, 2015, 11:32 
Offline

Joined: February 8th, 2014, 8:08
Posts: 456
Location: Eastern Europe /recovering worldwide/
sempre wrote:
some hope to have the data back?

I'd estimate chances by looking at the melted parking ramp. Photo indicates that recovery will be painful.

We have one or two similar drives right currently (and had more previously), you can expect things like 3 hours or more just to read the SA. After that SA still isn't fully extracted and the drive won't get ready on its own due to the gaps in it.

As for losing the magnetization, I think that mostly depends on material properties.
And it definitely would be interesting to look at the information on Curie point for platters.

_________________
• Remote RAID, NAS, SAN, VMware, DVR (CCTV), flash and tape recovery. Data recovery support.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 14 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Lukas, skinbob and 107 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group