View topic - Seagate 3tb expansion +

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Seagate 3tb expansion +

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

kilbert

Post subject: Seagate 3tb expansion +

Posted: December 1st, 2015, 21:10

Joined: December 2nd, 2013, 21:51
Posts: 21
Location: united states

Hi
Maybe a little help with my friends backup drive?
Drive is in external enclosure.
Drive spins, and heads make noise as a normal drive when powered up- It also stays spinning while I had it hooked up to power.
Windows does not recognise in drive management.
Linux does not recognise in drive management.

Linux lsusb sees the drive /or enclosure
kilbert@linux:~> lsusb
Bus 003 Device 010: ID 0bc2:3341 Seagate RSS LLC

Sound like a possible home repair?

thanks
Kilbert

Top

jermy

Post subject: Re: Seagate 3tb expansion +

Posted: December 2nd, 2015, 4:24

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal

in addition to Spildit if there is "no" unusual noise, a terminal log will help

Top

kilbert

Post subject: Re: Seagate 3tb expansion +

Posted: December 5th, 2015, 13:41

Joined: December 2nd, 2013, 21:51
Posts: 21
Location: united states

Thanks for the responses.
Took me awhile to read and remove the drive.

I opened the case, removed the drive.

Windows will not see it
Ran seatools for windows,will not see the drive.
ran gparted in linux, will not see.
lsusb linux: no drive listed, must have seen the sata bridge before.

testdisk w/ mhdd will not boot using usn mass storage option : hangs on initilizing host controller 3/4.

any options, hopefully a board repair...
Not interested in the data on the disk, just want to attempt repair.

Edit: disk model Barracuda 3000 GB model: ST3000M001

Top

jermy

Post subject: Re: Seagate 3tb expansion +

Posted: December 5th, 2015, 14:37

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal

auch DM series

jermy wrote:

in addition to Spildit if there is "no" unusual noise, a terminal log will help

Top

Amarbir[CDR-Labs]

Post subject: Re: Seagate 3tb expansion +

Posted: December 5th, 2015, 14:43

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]

Spildit wrote:

At this point if you don't need the data on the drive i would STRONGLY advice you to discard the drive and buy a new one. Never buy anything like a Seagate (since 7200.11 models and up) and the last thing you will want is a 7200.14 seagate drive. Just buy something else like Hitachi and be happy.

If you still want to attempt anything at all with the drive you will need at least a TTL adaptor like this :

http://www.hddoracle.com/viewtopic.php?f=46&t=192

Connect it to the drive like this :

http://www.hddoracle.com/viewtopic.php?f=6&t=193

And post what you see on terminal ...

In any case i think you will be loosing time as you don't want to re-use a drive that is so bad and that already failed to start with.

Spildit ,
they never write 7200.14 on these i wonder why ?

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com

Top

Page 1 of 1

[ 5 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 109 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum