MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 35 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
jermy
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 5th, 2015, 19:36 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
Spildit wrote:
I JUST HOPE that you are not the one dealing with the drive from this un-lucky user ...

no, it's not
the OP here is from austria and talking about a much older drive WD3200JB
over there the OP is from the arkansas USA (DR guy is from atlanta ga USA) and the issue is with WD5000AAKX
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 6:45 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
Thx alot again, i've to learn alot on DR, i know.. - but nobody starts with knowing everything.

For each new case i'm asking the ACE support before i start, so i'm a little bit confused, that they did not told me that...

But OK, maybe they think i did such simple things before...
Top
 Profile  
 
jermy
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 6:57 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
do the patient and donor have the same FW ver . ?
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 7:06 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
No, did not find an exactly matching drive... but i got so much info for now, i think it's enough - thx ;)
Top
 Profile  
 
jermy
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 7:37 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
so... if you don't/want more help on this one, the only thing left to say is i wish you good luck, hope you'll get the data recovered soon.
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 7:42 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
:D i just mean, that i have to test and read all the other things before ;)
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 9:52 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
i'll love you for that if it works, i'll test it next days, and buy you a coffee ;)
bitcoin address is actual?
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 12:07 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
now a read a little bit for rom rebuilding...

and it don't seems that it's possible for this disk...

http://blog.acelaboratory.com/pc-3000-f ... l-rom.html

It's a Caviar SE disk... with such a U12 IC...
Top
 Profile  
 
jermy
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 12:20 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
still not the end of the world
upload a pic. from the front label
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 13:29 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
Maybe i have a backup of the first time putting the disk in...
but i'm not sure. - and it also initilaize as a 18GB drive, but i think i have done the backup...

the only thing for getting the disk up normally is pressing "Spin UP"
spin up OK, but after that i can not load ldr and so on

autodetect always showing the empty FW with demo serial... of course.

SA dir reading tries a few times to start, but it's same...

picture is attached.


Attachments:
IMG_8783.JPG
IMG_8783.JPG [ 539.39 KiB | Viewed 9914 times ]
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 14:00 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
Spildit wrote:
Ok, if you plug the donor, place it to sleep, swap pcb to the patient, wake it up. You should be able to read patient modules.

Then place PCB back to original drive, backup firmware of donor/original drive and write to it module 31 that you have read from patient.

Power it off. Powr it on, put it to sleep, swap pcb to damaged drive, wake it up. Try to clone.


yeah... that was everything... i can directly access data... - not really neccessary to clone.

i don't know why they (ACE support) did not told this to me...

MANY MANY MANY Thx...

after translator was written - nearly everything is fine for reading... some bad sectors but its OK.

It can be so easy - but i did not got such a case, and because i could see the mainfolders, i thoght it's not neccessary to change something else, thought weak heads or something...

Just ask the Oracle :D
Top
 Profile  
 
jermy
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 14:16 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
congrats
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 14:18 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
Spildit wrote:
Nice !!!!

Happy that i could be of some help !!!

I'm getting the feeling that i'm improving allot as well and getting good at this.

I think that i know why the rom regen fails with drives with external rom as well. But of course it might still be a simple "fix" if you can read overlay - mod 11 and check version, get ROM compatible with it on database and patch the adaptives assuming they can be retrieved from SA, etc ...

In any case the important is that you can now get the data out of the drive !!!

Please do ask if you have further questions.

Regards and happy learning !


Yeah - learning DR will take some years, i'm not new on computers and servers, but i'm new on DR...
Just recovered about 30 disks... but such a thing till today i did not.
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 6th, 2015, 14:18 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
jermy wrote:
congrats


Thx :)
Top
 Profile  
 
outbreak198x
 Post subject: Re: Disk REading OK, but very slow
PostPosted: December 8th, 2015, 5:17 
Offline

Joined: July 23rd, 2015, 6:40
Posts: 123
Location: Austria
For me the word "Shift" was enough, i also can not set a piece of a puzzle 2 pieces more left, it won't match :D
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 35 posts ]  Go to page Previous  1, 2

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group