MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
radiologyman
 Post subject: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 11:46 
Offline

Joined: December 6th, 2015, 11:33
Posts: 6
Location: Texas
Hello, I recently got 4 tb Toshiba hdd with external enclosure, samsclub model. It stopped spinning and enclosure did not light up the diod as before, I can only see faint blue light intermittently. I did not drop this drive but may have used power supply from different enclosure. I pulled drive out of enclosure and when I put it in my docking station, the station seems to lose power with its light going dark. The drive is SATA MD04ACA400. I am willing to buy same model again to try to recover the files but I am very new to this. Any suggestions will be appreciated.
Top
 Profile  
 
radiologyman
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 12:30 
Offline

Joined: December 6th, 2015, 11:33
Posts: 6
Location: Texas
Spildit wrote:
Even if you buy another drive from the same model to use the PCB as a donnor you will have to move the ROM and NVRAM chips from your old PCB to the new one as it contains data that is unique to your drive and it's required for the drive to work with the new pcb.

By now your best option is to attempt a PCB fix.

If it's a simple diode that it's shorted due to overvoltage provided by the wrong power adaptor you might get lucky with a 0-cost fix :

http://www.hddoracle.com/viewtopic.php?f=100&t=86


Thanks, I got a multimeter. I also got older hard drives from which I can harvest diods if necessary. I have to look up a screwdriver tip to remove pcb screws, I will need a starlike tip with 6 rays, any suggestions?
Top
 Profile  
 
radiologyman
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 17:38 
Offline

Joined: December 6th, 2015, 11:33
Posts: 6
Location: Texas
I will need a torq screwdriver for a hexalobe screw to remove pcb, Will this one work?
http://www.ebay.com/itm/Simple-T8-Screw ... Sw5ZBWNyNC
Top
 Profile  
 
radiologyman
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 19:58 
Offline

Joined: December 6th, 2015, 11:33
Posts: 6
Location: Texas
I am thinking this one instead:
http://www.ebay.com/itm/30in1-Precision ... Sw3ydVs3OK
Top
 Profile  
 
fzabkar
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 20:35 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
I don't know about Toshibas, but Seagate HDDs require a Torx 6 (T6) screwdriver. You might like to purchase a set of bits rather than a single screwdriver.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
jermy
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 6th, 2015, 21:22 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1388
Location: isreal
Toshiba 3.5" is a T8
but not a bad idea
fzabkar wrote:
You might like to purchase a set of bits rather than a single screwdriver.
Top
 Profile  
 
radiologyman
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 23rd, 2015, 18:14 
Offline

Joined: December 6th, 2015, 11:33
Posts: 6
Location: Texas
I got a second drive with same problem. I got pics of the PCBs here, let me know if it's good enough quality. Thank you!


Attachments:
IMG_0372.JPG
IMG_0372.JPG [ 2.74 MiB | Viewed 9994 times ]
IMG_0373.JPG
IMG_0373.JPG [ 2.72 MiB | Viewed 9994 times ]
Top
 Profile  
 
data-medics
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 23rd, 2015, 18:20 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Spildit wrote:
Even if you buy another drive from the same model to use the PCB as a donnor you will have to move the ROM and NVRAM chips from your old PCB to the new one as it contains data that is unique to your drive and it's required for the drive to work with the new pcb.


Actually I'm pretty sure this one is a native Toshiba 3.5", not a re-branded Hitachi. So no NVRAM, just a ROM full of CP's.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
data-medics
 Post subject: Re: Toshiba 4 tb HDD does not spin
PostPosted: December 23rd, 2015, 18:24 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
The 8 pin chip located at IC10 is what you'd need to transplant to another donor PCB board to make it compatible. You might want to check the diode located at CN1 and the other one next to it with a multi-meter to see if it's short circuited. If it is, you can simply remove it.

As for the other Seagate PCB there, check the zero ohm resistors near the power connection to be sure they read 0 ohms. Then also check the two large diodes on the right side to see if they are shorted.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 42 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group