Dear Friend'S,

I have a this hard disk.

this hard disk ROM chip burn.

what can do for this for recovery data ?

If you have a matching donor you can try hotswap and/or regen ROM, but you need FW tools like PC3K, MRT, WDMarvel or FRP to do that.

For PC3K take a look here

Best regards,

_________________
030 Datenrettung Berlin GmbH (Germany)
HDD, SSD, NAS, RAID Datenrettung - 030-datenrettung.de

Hi,

Thanks for your reply.

i have a MRT Tool.

I feel have to ask this.
In your data recovery lab is there anybody who knows how to deal with basic recovery or do you always have to ask on this forum how to do every job?

Hi Yes,

i am new for this data recovery process..

You seems new to every process...
Don't work on clients drives unless you know what you're doing.

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se

Hi,

i know do hot swap process.
more time i do this with SAMSUNG HDD,

first time come to me WD USB 3 HDD with this problem.

and this hard disk problem is,

power spin up well, but not detect via USB.

If disk spins fine why should ROM be damaged?

Convert drive to SATA and see if you can work on it with MRT to fix FW-issues like slow-init, damaged modules and so on.

+1 Please do not risk clients data, if you do not know how to use MRT yet, do not use it on client drives!

best regards,

_________________
030 Datenrettung Berlin GmbH (Germany)
HDD, SSD, NAS, RAID Datenrettung - 030-datenrettung.de

Then the ROM is fine. Bad diagnosis

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Hi,

i do that,

then hard disk motor not spin up.

USB PCB Number - 2060-771737-000, I am replace SATA PCB number is 2060-771692-005. and swap ROM chip.

why then HDD motor not spin up ?

because you swapped the wrong chip

Hi,

There Have a 2 Chip U12 & U8.

I am swap U12 Chip.

it's correct ?

you swapped its contents or the chip it self ?

U12, CHIP.

Not spinning: Might be U12 is not correctly soldered. These WSON8 are not as easy to swap as the ones with legs. I would get the chip off and make a ROM backup with external programmer so if it reads ROM should be fine and you have a backup . Then resolder it on the pcb and try if drive spins.

btw: what happened with U8? Looks also not in place ... if you do clients drive plz stop it.

Best regards,

_________________
030 Datenrettung Berlin GmbH (Germany)
HDD, SSD, NAS, RAID Datenrettung - 030-datenrettung.de

I have a U8 CHIP copy.

not important, the more important is the U12
although it can be dealt with (even it's damaged)

You need to practice your soldering skills!
U8 is clearly sitting at an angle. The soldering is also untidy.
More importantly U12 is positioned off centre. I would suggest it is so far out of alignment the pins might not make contact with ALL the pads. If that is the case then of course the drive won't spin!
You also need to check your own work!

+1 http://prntscr.com/9c7p34

_________________
Sabo Computer Repairs & Data Recovery