On PC3K, this 320GB hard drive spins up, BSY light stays on...

-has normal, quiet spinning sound, but stays BSY forever.

-Power off/on, there is no Terminal output.

-needless to say PC3K is useless at this point because something needs fixing first.

-any ideas folks?

(I have ordered an exact match Donor controller and will
see the results of ROM swap after a week or so...)

-Thanks
==============================================

Odd there is no terminal output. Double checked settings and correct adapter?
And tried a loader yet?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

If you have PC3K , I understand what you've already seen , but .....

you tried to solve the problem 7200.11 busy ????

I have seen drives before that nothing was being posted to terminal at all, however most often it's simply a matter of the terminal not working at the moment.

First, check if your terminal is even working using a good drive. Then I'd probably try shorting the read channel.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company