View topic - Question about PCB of defective disks (ST

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Question about PCB of defective disks (ST_M13FQBL, spinning

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

Cerbero

Post subject: Question about PCB of defective disks (ST_M13FQBL, spinning

Posted: February 8th, 2016, 23:53

Joined: June 30th, 2015, 20:04
Posts: 5
Location: Brazil

Hi all,

One question: HDDs who is not detected in BIOS (but spinning or “clicking” sounds), detected as ST_M13FQBL or 0mb in BIOS, and “11 clicks of death” are viable as a donor drives in data recovery or repair hard drives with PCB problems?
I asking because I have a lot here with all these errors/problems (all out of warranty), including 05 units of ST500DM002 - the worst disk manufactured in history - with ST_M13FQBL problem, I'm thinking to sell these drives for this purpose.

P.S: The incredible is Seagate simply ignore this error all this time. It's a shame, 8 years old disks is more trusftul than this crap.

Regards,

Top

pcimage

Post subject: Re: Question about PCB of defective disks (ST_M13FQBL, spinn

Posted: February 9th, 2016, 3:21

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

You could probably sell them on eBay as "faulty for spares only"' the PCB's might be useful to someone.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], Pi0tR and 72 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum