hi everybody, i have an seagate st2000DM001 2 plates 1tb each, pcb n°100664987 rev A.
my bios cant recognise this hd, even another pc.
i just connected the rx tx gnd to my pl2023 serial adapter, 10k resistor between rx and 3,3v and a diode to drop the voltage.
all fine, i can read the msg from console:
Code:
Boot 0x40M
Spin Up
TCC-001F[0x000065B4][0x00006A20][0x00006E8C]
Trans.
Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-001F
(P) SATA Reset
MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
MCMainPOR: MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 0A61
Nonvolatile MCMT sequence number 001B4B14
[RSRS] 077B
ProcessRWError -Read- at LBA 0000000000060F17 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060F19 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060F1E Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060F58 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060F5E Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060FD8 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060FDD Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060FE5 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060FE8 Sense Code=40000087
ProcessRWError -Read- at LBA 0000000000060FEB Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 0000000000060FEB!
Reconstruction: Completed 1:
[MCMTWS]
Rst 0x40M
MC Internal LPC Process
Spin Up
TCC-001F
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
the msg LED:0000 repeats 50+ times...
is this a big problem ?
idk what need to do... cant go to 'command' pressing crtl+z..
someone have a light ?
FAQ
Search
Login
Register
HDDGURU FILES
