View topic - ST2000DM001 BSY

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST2000DM001 BSY

Page 1 of 2

[ 27 posts ]

Go to page 1, 2 Next

Previous topic | Next topic

Author

Message

pekka

Post subject: ST2000DM001 BSY

Posted: July 9th, 2012, 5:24

Joined: June 29th, 2009, 8:43
Posts: 16
Location: EU

Hi,

Model: ST2000DM001
FW: CC4C

Drive stays busy and writes to terminal:

Code:

Boot 0x40M
 Spin Up
TCC-001B[0x000065B4][0x00006A20][0x00006E8C]
 Trans.

Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001B
(P) SATA Reset

 MCMainPOR: Start: 
 Check MCMT Version: Current
 MCMainPOR: Non-Init Case
 MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
 MCMainPOR:  MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start 
  Max number of MC segments 0A61
 Nonvolatile MCMT sequence number 0008281B
 [RSRS] 04E0
ProcessRWError -Read-   at LBA 000000000003F171  Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000003F171!

Reconstruction: EXCEPTION: Seg Read Fail: Status = 0000
Continuing after error 
Reconstruction: Completed 1: 
[MCMTWS]
Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001B
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE

Heads are fine, worked on another drive. Donor heads does not work on patient, gives same output from terminal as original heads.
After changing back original heads I can hear two louder head positioning sound and in terminal I get this:

Code:

Boot 0x40M
 Spin Up
 RECOV Servo Op=0100 Resp=0005
TCC-001A[0x000065B4][0x00006A20][0x00006E8C]
 Trans.

Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001A
 RECOV Servo Op=0900 Resp=0005
(P) SATA Reset

 MCMainPOR: Start: 
 Check MCMT Version: Current
 MCMainPOR: Non-Init Case
 MCMainPOR: EXCEPTION: MCMT PRI copy corrupt
 MCMainPOR:  MCMT SEC copy valid
Reconstruction: MCMT Reconstruction Start 
  Max number of MC segments 0A61
 Nonvolatile MCMT sequence number 0008281B
 [RSRS] 04E0
ProcessRWError -Read-   at LBA 000000000003F171  Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000003F171!

Reconstruction: EXCEPTION: Seg Read Fail: Status = 0000
Continuing after error 
Reconstruction: Completed 1: 
[MCMTWS]
Rst 0x40M
 MC Internal LPC Process
 Spin Up
TCC-001A
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE

So maybe someone gives me hint whats wrong with this drive? Is this "BSY problem" as seen on 7200.11 series?

Top

Nick_CT

Post subject: Re: ST2000DM001 BSY

Posted: July 9th, 2012, 8:38

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa

pekka wrote:

So maybe someone gives me hint whats wrong with this drive? Is this "BSY problem" as seen on 7200.11 series?

No, definitely not the "BSY problem" as per .11 series.

ProcessRWError -Read- at LBA 000000000003F171 Sense Code=40000087
InitiateMarkPendingReallocateRequest for disc_lba: 000000000003F171!

Looks to me like some bad areas in SA.

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town

Top

Deuterium

Post subject: Re: ST2000DM001 BSY

Posted: July 9th, 2012, 15:54

Joined: April 4th, 2008, 6:24
Posts: 57
Location: UK

Nick_CT wrote:

pekka wrote:

So maybe someone gives me hint whats wrong with this drive? Is this "BSY problem" as seen on 7200.11 series?

Agree

_________________
You are an imperfect hard drive...Finding your weakness is only a matter of time

Top

Kamen

Post subject: Re: ST2000DM001 BSY

Posted: July 9th, 2012, 18:17

Joined: March 10th, 2006, 1:08
Posts: 33

Did you try to off PendingReallocateRequest ?

Top

pekka

Post subject: Re: ST2000DM001 BSY

Posted: July 10th, 2012, 10:55

Joined: June 29th, 2009, 8:43
Posts: 16
Location: EU

Kamen wrote:

Did you try to off PendingReallocateRequest ?

What do you mean?

Top

Kamen

Post subject: Re: ST2000DM001 BSY

Posted: July 10th, 2012, 18:29

Joined: March 10th, 2006, 1:08
Posts: 33

I mean have you tried to set a "BGMSFlags" in the disable ?

Top

pekka

Post subject: Re: ST2000DM001 BSY

Posted: July 19th, 2012, 8:02

Joined: June 29th, 2009, 8:43
Posts: 16
Location: EU

No, I can't do nothing because it stays busy. Also can't access terminal, anyone knows shorting points for this pcb 100664987 REV A?

Top

aliasofiuco

Post subject: Re: ST2000DM001 BSY

Posted: March 3rd, 2013, 17:01

Joined: March 3rd, 2013, 2:48
Posts: 6
Location: Italy

pekka wrote:

No, I can't do nothing because it stays busy. Also can't access terminal, anyone knows shorting points for this pcb 100664987 REV A?

@pekka
Did you ever solve your problem?
I have the same hard disk you have and with the same problem.

When I open the Hyperterminal and press CTRL+Z, the only message I get is a continuously repeat:

LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
LED:00000047 FAddr:FFFFFFFE
...
and so on.
I can't even put any command!

Thank in advance.

Top

pekka

Post subject: Re: ST2000DM001 BSY

Posted: March 3rd, 2013, 17:06

Joined: June 29th, 2009, 8:43
Posts: 16
Location: EU

aliasofiuco wrote:

pekka wrote:

No, I can't do nothing because it stays busy. Also can't access terminal, anyone knows shorting points for this pcb 100664987 REV A?

No.
Have you tried shorting reading channel to get access to terminal?

Top

aliasofiuco

Post subject: Re: ST2000DM001 BSY

Posted: March 3rd, 2013, 17:11

Joined: March 3rd, 2013, 2:48
Posts: 6
Location: Italy

No. I'm totally newbie in dealing with Hard Disks.
I don't even know what are you talking about.
Are you suggesting me to use a jumper to join the pins GND TX RX?

Top

doncgambino

Post subject: Re: ST2000DM001 BSY

Posted: December 22nd, 2013, 11:34

Joined: December 22nd, 2013, 11:21
Posts: 1
Location: Nehterlands

Has anybody found a way to solve this problem yet?

I have a similar problem with this drive. I have the terminal connection but get a ProcessRWError
and the drive keeps outputting text to the terminal. I can't type anything. Also can' t find any useful information on the code "0xC3160081" that it generates.

Code:

Starting LBA of RW Request=000000000E96E947  Length=00000004
ProcessRWError -Write-  at LBA 000000000E96E947  Sense Code=C3160081

[000000001D322661]vvvvvvvvvv[000000001D322662]vvvvvvvvvv[000000001D322663]vvvvvvvvvv[000000001D322664]vvvvvvvvvv[000000001D322665]vvvvvvvvvv[000000001D322666]vvvvvvvvvv[000                                                                                                                                                             000001D322667]vvvvvvvvvv[000000001D322668]vvvvvvvvvv[000000001D322669]vvvvvvvvvv                                                                                                                                                             [000000001D32266A]vvvvvvvvvv[000000001D32266B]vvvvvvvvvv[000000001D32266C]vvvvvv                                                                                                                                                             vvvv[000000001D32266D]vvvvvvvvvv[000000001D32266E]vvvvvvvvvv[000000001D32266F]vv                                                                                                                                                             vvvvvvvv[000000001D322670]vvvvvvvvvv[000000001D322671]vvvvvvvvvv[000000001D32267                                                                                                                                                             2]vvvvvvvvvv[000000001D322673]vvvvvvvvvv[000000001D322674]vvvvvvvvvv[000000001D3                                                                                                                                                             22675]vvvvvvvvvv[000000001D322676]vvvvvvvvvv[000000001D322677]vvvvvvv

After a bit a does a request for file save:

Code:

[000000001D3226DF]vvvvvvvvvv
(DOS) Requesting File Save
[000000001D3226E0]vvvvvvvvvv[000000001D3226E1]

Top

Leo

Post subject: Re: ST2000DM001 BSY

Posted: December 22nd, 2013, 14:29

Joined: April 12th, 2006, 8:18
Posts: 32
Location: Chicago, USA

doncgambino:
There is SRS (Seagate Recovery Services) facility in Amsterdam, they can recover data for you.
Sorry but it is usually not so simple as "LED CC fix"...

Top

jono-ats

Post subject: Re: ST2000DM001 BSY

Posted: December 22nd, 2013, 20:11

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA

It's a firmware corruption issue.

_________________
http://www.datasaversllc.com

Top

hkn_1001shab

Post subject: Re: ST2000DM001 BSY

Posted: May 18th, 2014, 4:33

Joined: July 25th, 2012, 14:37
Posts: 1
Location: Rasht,Iran

Has anybody found a solution to solve this problem :?:

@jono-ats
hi
do you have any solution for this problem?

thanks

Top

jono-ats

Post subject: Re: ST2000DM001 BSY

Posted: May 19th, 2014, 10:34

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA

You might try clearing SMART and rebuilding the translator, after taking the appropriate precautions.

_________________
http://www.datasaversllc.com

Top

xeonium

Post subject: Re: ST2000DM001 BSY

Posted: May 14th, 2016, 4:06

Joined: May 14th, 2016, 4:00
Posts: 2
Location: Kazakhstan

I'll get this necro-topic to life. May be it would be helpfull for someone.
I had a problem with seagate barracuda green 2tb st2000dl003

This helped me:

Quote:

F3 A>R0,10000
F3 A>R10000,10000
F3 A>R20000,10000
F3 A>R30000,10000
F3 A>R40000,10000
F3 A>R50000,10000
F3 A>R60000,10000
F3 A>R70000,10000
F3 A>R80000,85a1

F3 2>P0000,0000
F3 A>W0,10000
F3 A>W10000,10000
F3 A>W20000,10000
F3 A>W30000,10000
F3 A>W40000,10000
F3 A>W50000,10000
F3 A>W60000,10000
F3 A>W70000,10000
F3 A>W80000,85a1

detach power, wait for 10 sec and attach it back
HDD will recover media cache. After this you can shutdown your pc and connect hdd to sata and power.

Found this here:
http://forum.ru-board.com/topic.cgi?for ... tart=20#16
http://forum.ru-board.com/topic.cgi?for ... art=100#10

Hope this can help someone as it did for me. GL!

Top

xeonium

Post subject: Re: ST2000DM001 BSY

Posted: May 15th, 2016, 8:40

Joined: May 14th, 2016, 4:00
Posts: 2
Location: Kazakhstan

Sorry, i cant edit previous msg and post PMs.
labtech asked me about drive's behavior in the terminal upon power on BEFORE issuing these commands.
Sorry, but i didnt save those logs. I dont do hdd recovery professionally, it was my own hdd. It showed up in bios (once per reboot) and didnt show in OS, or programs like victoria or mhdd.

But i had the same output as doncgambino

Quote:

Starting LBA of RW Request=000000000E96E947 Length=00000004
ProcessRWError -Write- at LBA 000000000E96E947 Sense Code=C3160081

OFC those numbers were different.
By googling "ProcessRWError -Write-" i got to this forum. People here said its hard to fix it yourself, but it is not.

Top

labtech

Post subject: Re: ST2000DM001 BSY

Posted: May 16th, 2016, 10:41

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Thx for reply

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

fzabkar

Post subject: Re: ST2000DM001 BSY

Posted: May 17th, 2016, 17:12

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia

Thank you xeonium!!!

_________________
A backup a day keeps DR away.

Top

mikail13

Post subject: Re: ST2000DM001 BSY

Posted: October 27th, 2016, 16:59

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul

i will try method of xeonium..

Quote:

try red pins first, and if they not work, try yellow pair.

from entec

Attachment:

short pins st2000dm001.jpg [ 726.13 KiB | Viewed 23482 times ]

Top

Page 1 of 2

[ 27 posts ]

Go to page 1, 2 Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 67 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum