MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
Amarbir[CDR-Labs]
 Post subject: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 5th, 2016, 9:08 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Hello Everyone ,
I Have a Case Its a Seagate 7200.10 Series Drive ,Model No is ST3250310AS ,Firmware 3.AHA .This Drive Had a Ce Log Error No 43,I Had No Clue That Another Tool DFL:SRP [ Not PC3K ] Has a Very Dangerous and Destructive Command To Handle Such Cases .It Takes The Drive To Terminal T> Mode And Uses a Command T4E To Clear Ce Logs ,In My Case This Process Did Not Complete Properly And Now i Have a Drive Thats In This Condition

Reset
4096k x 16 DRAM
NIGHTHAWKPLUS - 1_Disk S-1A 08-29-07_16:51

Buzz HM SFI
!
(P)SATA Reset
Not Interface Age!
INVALID Cert Disk Code - ROM Resident Revision Required: AHZ140
Command Inactive - No VALID Cert Code Detected

T>

PS : Can Someone Guide Me How To Solve this Its Been a While i Have Worked On Old Drives And The Only Tool i Had those Days Was Salvation DATA Seagate Doctor Which i do Not Use anymore .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
michael chiklis
 Post subject: Re: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 5th, 2016, 9:32 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
T4E was a very bad moove, sorry to say it! :(
You have should to recover data by using LDR.

Did you do SA backup?
Can you restore modules from backup?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI


Last edited by michael chiklis on July 5th, 2016, 9:45, edited 1 time in total.

Top
 Profile  
 
michael chiklis
 Post subject: Re: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 5th, 2016, 9:37 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
T4E will rebuild cert table which often works but resets interface age also, without correct CERT code you cannot retutn interface age to native age 50.
You need to create custom loader from app code of your disk, then from here you need to load to RAM good cert code to allow good access.

T4E can work, but with bads in SA it will fail and brick HDD, also where CERT revision is different to ROM revision it wont allow restore to ATA age.
Maybe its possible to restore CERT with one from donor, but im not sure.
N50,22 is the command to return to age 50 but without correct CERT code you cannot retutn interface age to native age 50

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
H13
 Post subject: Re: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 5th, 2016, 13:24 
Offline

Joined: December 16th, 2015, 12:37
Posts: 99
Location: GCC
have u try to load .. LDR


?
Top
 Profile  
 
day1data
 Post subject: Re: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 6th, 2016, 5:08 
Offline
User avatar

Joined: January 6th, 2015, 2:21
Posts: 186
Location: Germany
michael chiklis wrote:
T4E will rebuild cert table which often works but resets interface age also, without correct CERT code you cannot retutn interface age to native age 50.
You need to create custom loader from app code of your disk, then from here you need to load to RAM good cert code to allow good access.

T4E can work, but with bads in SA it will fail and brick HDD, also where CERT revision is different to ROM revision it wont allow restore to ATA age.
Maybe its possible to restore CERT with one from donor, but im not sure.
N50,22 is the command to return to age 50 but without correct CERT code you cannot retutn interface age to native age 50


+1

Reset interface age is N50,,22
You missed a comma :)

_________________
Web: https://www.day1data.de
Top
 Profile  
 
michael chiklis
 Post subject: Re: Assistance Required For 7200.10 [ ST3250310AS ]
PostPosted: July 6th, 2016, 14:17 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy
day1data wrote:
michael chiklis wrote:
T4E will rebuild cert table which often works but resets interface age also, without correct CERT code you cannot retutn interface age to native age 50.
You need to create custom loader from app code of your disk, then from here you need to load to RAM good cert code to allow good access.

T4E can work, but with bads in SA it will fail and brick HDD, also where CERT revision is different to ROM revision it wont allow restore to ATA age.
Maybe its possible to restore CERT with one from donor, but im not sure.
N50,22 is the command to return to age 50 but without correct CERT code you cannot retutn interface age to native age 50


+1

Reset interface age is N50,,22
You missed a comma :)


:lol: :lol:
Thank you day1data, yes i missed to type the second comma.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 93 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group