Ok, I connected the drive with the Terminal Interface. Now I can access the SA.
But it seems like there is another problem with this drive. It seems like the P-List and the Translator are damaged:
Code:
0033 : Err: 07 : Err: 07 : P-List (Primary defect list) (primary defects)
0031 : Err: 07 : Err: 07 : Translator (pdlist)
000C : Ok : Ok : Models table (Models table)
0034 : Ok : Ok : G-List (Grown defect list) (ground defects)
0032 : Ok : Err: 05 : Relo-List (Candidate defects) (rbblist)
0036 : Ok : Ok : T-List Module
0029 : Ok : Ok : Loaded part of microprogram code
0040 : Err: 07 : Err: 07 : Adaptive data
0041 : Err: 07 : Err: 07 : Adaptive data
0042 : Err: 02 : Ok : Adaptive data
0043 : Ok : Err: 02 : Adaptive data
004E : Err: 07 : Err: 07 : Loaded part of microprogram code
0049 : Err: 07 : Err: 07 : Adaptive data
004A : Ok : Ok : Adaptive data
004D : Ok : Ok : Adaptive data
0003 : Ok : Ok : Format Select Data Module
0025 : Ok : Ok : Encyiption keys for encripted HDD (Encription key)
0026 : Ok : Ok : (DLG DIAG Log)
0038 : Ok : Ok : Encyiption keys for encripted HDD (Encription key)
0039 : Ok : Ok : Loaded part of microprogram code
0037 : Ok : Ok : Gain Call Data Module
002D : Err: 07 : Err: 07 : Debug Log
002E : Err: 07 : Err: 07 : Loaded part of microprogram code
I tried to read the P-List and get this error:
Code:
Defect list reading
Table................................... : P-List
File.................................... : <HDD Profile>\Defects\PList2.chs
Defect list has damages in actual data area
But if I try composite reading, I get the P-List.
What can I do now?
FAQ
Search
Login
Register
HDDGURU FILES
