View topic - 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

7200.12 ST3320418AS BUSY - SYS not accessible via serial

Page 1 of 1

[ 10 posts ]

Previous topic | Next topic

Author

Message

michael chiklis

Post subject: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 17:51

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Hi,
i have this drive stuck in busy state.
I try translator regen, but i always get error (with every translator command that i send).
I can't even access to SYS files via serial port, i always get 'serial port error timeout'.
Motor spins good, no head clicking, good calibration sound

Code:

Rst 0x10M
Servo Processor Is Reset. 
RW: Disc Ctlr Initialization Completed.
ExecuteSpinRequest
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ATA  15 Cmds
Ts(ms)     dT(ms)   Op Cnt  LBA
         0 99999999 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000

RW  32 Cmds
Ts(ms)     dT(ms)   xT(ms)  Type Option Mode  St EC       Info
4294967295 99999999 4294705152 FF  DFFFFFFF 7FDFFFFF FF FEFFFBFF 
2139092991 2139092992 2088765440 FE  FEEEFBEF FFFFFEFD FB 7FF3FFFF 
4294967295 2155874304        0 FF  FDFFFFFF 7FFFFFFF BF FFFDFFFF 
4286570495 4286570496  6029312 FF  DFFFFFFF FFFFFFFF FF FFFFFFFF 
4160618495 4169015296 2281832448 FF  FFFFE7F7 FFFEFFFD FF FFFFEFFE 
4294967295 134348800 4294955000 DD  FFFFFFFF FFFFEBFF DF FFBF7BEF 
4261410815 4261410816 33556416 FF  FFFCFFF7 7FFFFFF7 0 04005000 
         0 33556481 16777216 00  100002 202000 0 08000008 SEEK RD USR PBA B 000000000004 L 00000000 
         0        0        3 00  040900 001000 20 00080002 SEEK CRT LBA 
     16896    16896 134331904 00  8000000 2000808 0 00280000 SEEK RD USR LBA 
    262400   245504 4294704900 00  000440 8400004 0 00400200 SEEK CMP SYS LBA 
         0 4294704896        2 20  1004004 400200 0 00000100 RELD_RAP 
         8        8 570425336 00  10000200 80000100 0 00000000 SEEK RD USR LBA 
   4194304  4194296 4290772992 04  000000 000000 0 00040800 SRV_MEM Type 80 Addr 04002000 Cnt 0200 
         0 4290772992        0 08  40000010 091004 4 00005800 CAL 
  33849348 33849348 4261150724 00  094008 500120 0 00021000 SEEK RD USR TRK CHS 000080.0.0000 L 00200418 
         0 4261117948        0 10  000880 000000 1 20040002 GET_RVFF 
    397312   397312 4294586368 00  000000 40080000 0 00010000 SEEK RD USR LBA 
   1048576   651264 4294443008 40  004001 00800C 0 00000800 TWK_WR_PWR 
      1025 4293919745 4294966271 00  40000000 10900000 0 00000000 SEEK RD USR LBA 
       512 4294966783 33553921 00  20080000 9004060 4 40000021 SEEK RD USR LBA 
      1422      910     3772 2F  000000 000000 1 00000080 SPN_UP NORMAL 
      5194     3772       15 34  000000 000000 1 00000080 TCC 0 
      5210       16       21 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000000000 L 00000004 BO 000000 BES 00E9C76.00E9E75.00E9C76 
      5231       21      267 02  002241 000000 2 43110081 XFR RD SYS LBA B 000000025CB4 L 00000004 BO 000000 BES 00E9C76.00E9E75.00E9C76 
      5498      267     2257 02  002241 000000 2 C4090082 XFR RD SYS LBA B 000000025CB4 L 00000001 BO 000000 BES 00E9C76.00E9E75.00E9C76 
      7761     2263       42 02  002241 000000 0 89800094 XFR RD SYS LBA B 000000008A0C L 000000C8 BO 000000 BES 006207E.006847D.006207E 
      7804       43        4 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000075AA L 00000001 BO 000000 BES 0061A7E.0061AFD.0061A7E 
      7809        5        2 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000055B4 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      7811        2        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002B268 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      7820        9      882 02  005041 000000 0 89800094 XFR WR SYS LBA B 0000000055B4 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      8703      883        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002B268 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE
ASCII Diag mode

F3 T>m0,2,2,,,,,22

DiagError 0000500E Process Defect List Error
R/W Sense 00000002, R/W Error 841C0087, List Offset 00000000, List Index 00253BD3, File Error 000000D0

F3 T>

Attachment:

serial port timout.jpg [ 239.52 KiB | Viewed 13519 times ]

How to fix this problem?
NO DATA NEEDED

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 19:00

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Seem to be working something now

Attachment:

Immagine.jpg [ 298.79 KiB | Viewed 13507 times ]

work in progress...

MRT i think doesn't have such option

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 19:04

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

OK, now is ready again

Attachment:

Immagine2.jpg [ 461.04 KiB | Viewed 13505 times ]

Sediv has a lot more stuff than MRT that can help on this type of case

Attachments:

Immagine2.jpg [ 411.06 KiB | Viewed 13504 times ]

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 20:16

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Code:

Rst 0x10M
Servo Processor Is Reset. 
RW: Disc Ctlr Initialization Completed.
ExecuteSpinRequest
(P) SATA Reset

ASCII Diag mode

F3 T>
ATA  15 Cmds
Ts(ms)     dT(ms)   Op Cnt  LBA
         0 99999999 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000
         0        0 00 0000 000000000000

RW  32 Cmds
Ts(ms)     dT(ms)   xT(ms)  Type Option Mode  St EC       Info
      4692 99999999        9 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000055C4 L 00000009 BO 000000 BES 006ED80.006F1FF.006ED80 
      4704       12        0 42  002241 000000 1 00000080 SWD 
      4713        9        4 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000055B4 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4718        5        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002B268 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4726        8        3 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000060A4 L 00000006 BO 000000 BES 006D800.006DAFF.006D800 
      4729        3        2 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000075AA L 00000001 BO 000000 BES 0061A7E.0061AFD.0061A7E 
      4731        2        4 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000008E55 L 00000001 BO 000000 BES 006D800.006DCFF.006D800 
      4736        5        4 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000075AA L 00000001 BO 000000 BES 0061A7E.0061AFD.0061A7E 
      4740        4        9 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000009067 L 00000014 BO 000000 BES 00C17F6.02FFFFF.00C17F6 
      4750       10        6 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000075AB L 00000001 BO 000000 BES 00618FE.006197D.00618FE 
      4756        6        4 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000008E54 L 00000001 BO 000000 BES 006D800.006DCFF.006D800 
      4761        5        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 000000008E54 L 00000001 BO 000000 BES 006D800.006D87F.006D800 
      4769        8        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002EB08 L 00000001 BO 000000 BES 006D800.006D87F.006D800 
      4777        8       10 02  002241 000000 0 43110081 XFR RD SYS LBA B 0000000060A4 L 00000006 BO 000000 BES 006D800.006DAFF.006D800 
      4787       10        9 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000060A4 L 0000000A BO 000000 BES 006D800.006DCFF.006D800 
      4796        9        5 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000055B4 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4801        5        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002B268 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4809        8        0 27  005041 000000 1 00000080 SND_SRV 0C01 0000 0000 0000 0000 0000 0000 0000 0001 D289 00D0 
                                                          0D5C 0400 0000 000B 0002 F580 F240 0000 10A2 0000 0000 0000 0000 0000 0000 0000 
      4815        6       11 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000008A0C L 000000C8 BO 000000 BES 006207E.006847D.006207E 
      4830       15        5 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000008E63 L 00000002 BO 000000 BES 006D800.006DCFF.006D800 
      4836        6        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 000000008E63 L 00000002 BO 000000 BES 006D800.006D8FF.006D800 
      4844        8        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002EB17 L 00000002 BO 000000 BES 006D800.006D8FF.006D800 
      4852        8        8 02  002241 000000 1 00000080 XFR RD SYS LBA B 000000008E63 L 00000002 BO 000000 BES 00C17F6.02FFFFF.00C17F6 
      4861        9        4 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000075AA L 00000001 BO 000000 BES 0061A7E.0061AFD.0061A7E 
      4865        4        5 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000060A4 L 00000006 BO 000000 BES 006D800.006DAFF.006D800 
      4871        6        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000060A4 L 0000000A BO 000000 BES 006D800.006DCFF.006D800 
      4879        8        9 02  002241 000000 1 00000080 XFR RD SYS LBA B 0000000060E8 L 00000001 BO 000000 BES 006015F.00601DE.006015F 
      4888        9        4 02  005041 000000 1 00000080 XFR WR SYS LBA B 0000000055B4 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4893        5        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002B268 L 00000008 BO 000000 BES 0061BFE.0061FFD.0061BFE 
      4902        9        0 47  000000 000000 1 00000080 DISC_SLIP 
      4902        0        8 02  005041 000000 1 00000080 XFR WR SYS LBA B 000000008E54 L 00000001 BO 000000 BES 006D800.006D87F.006D800 
      4911        9        7 02  005041 000000 1 00000080 XFR WR SYS LBA B 00000002EB08 L 00000001 BO 000000 BES 006D800.006D87F.006D800 
ASCII Diag mode

F3 T>/7

F3 7>m100
 
 OverlayCompatibilityCheck failed 

Unable to load Diag Cmd Processor Overlay

F3 7>/

F3 T>V1

Unable to load Diag Cmd Processor Overlay

F3 T>V2

Unable to load Diag Cmd Processor Overlay

F3 T>V4

Unable to load Diag Cmd Processor Overlay

F3 T>V8

Unable to load Diag Cmd Processor Overlay

F3 T>V10

Unable to load Diag Cmd Processor Overlay

F3 T>V40

Unable to load Diag Cmd Processor Overlay

F3 T>V80

Unable to load Diag Cmd Processor Overlay

F3 T>

something is still wrong, i still can't access into SYS file even via serial port, but now drive gets ready when i power on

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 20:19

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

If i try to do anything in utility, it goes busy (but DRD and DSC flags stay on) and get LED CC error on terminal

Code:

LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669
LED:000000CC FAddr:00287669

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 20:34

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

OK, i uploaded LDR with MRT, now i can access to SYS. I'm writing back original SYS from backup

P.S.
I had backup LDR from this drive before i started to play with 2 weeks ago.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 4th, 2017, 20:44

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

ok i will test LDRs on both tool, the reason why i'm working again with MRT is because i've an older sediv version than yours, which i think doesn't support sys writing (i still have to activate the last version).
I will check this too when i get back on sediv system (tomorrow).
Thank you, now i'm going to sleep.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 5th, 2017, 19:25

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

My last sediv version is 5.1.6.20 and does support SYS (read and write).

Sediv seem supporting MRT loader file, this is good.

I'm doing some experiments on this drive now, i let you know more soon, thank you.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject:

Posted: February 6th, 2017, 11:48

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

Yes, my sediv version supports reading/writing SYS only via ATA. I should update it so that i will be able to 'play' with SYS also in serial mode.

I wrote back all tracks by using MRT (sediv doesn't have utility for read/write tracks).
At this time i wrote into SA 0 all tracks that i have backup at beginning (i mean when the drive didn't have yet LBA limited access problem) from SA 1.
Then i started surface scan, i couldn't access into first sectors, but i can access into sectors afterwards until the last LBA (this means that limited LBA access is fixed) but there are further problems...
I did clear G-list (NG was already empty), then i started zero fill but when erase finished i found again a lot of g-list entries, so this means that drive has surface damages or weak heads (or both).

I made a video for you Spildit (and of course for everyone who want to see it) to show you that the drive has physical problems.
I think heads are good but there are a lot of damaged zones, expecially on surface 0

http://www.mediafire.com/file/nla002e2h ... th_MRT.wmv

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

michael chiklis

Post subject: Re: 7200.12 ST3320418AS BUSY - SYS not accessible via serial

Posted: February 6th, 2017, 14:25

Joined: December 5th, 2011, 5:38
Posts: 1740
Location: Verona, Italy

yes, i think we have to disable bad zones.
I don't know if my sediv version has option to cut zones, but mrt should have it.
I will try to cut bad zones with mrt, you might try with sediv

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI

Top

Page 1 of 1

[ 10 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum