MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 
  Previous topic | Next topic 
Author Message
SlingShot
 Post subject: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 11:15 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
I tried to clean a finger print from a platter using isopropyl but it leaves residue when evaporated.

How do you guys go about successfully cleaning a platter ?
Top
 Profile  
 
lcoughey
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 15:35 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2574
Location: Ontario, Canada
I don't suggest you try licking it.

_________________
Luke
Recovery Force Data Recovery
Top
 Profile  
 
SlingShot
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 15:44 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
Glad you said that Luke, was thinking it may have helped ;)
Top
 Profile  
 
fzabkar
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 17:01 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
Precision Cleaning for Hard Disk Drives:
http://solutions.3m.com/wps/portal/3M/en_WW/3MNovec_LA/Home/Applications/PrecisionCleaning/HardDiskDrives/

_________________
A backup a day keeps DR away.
Top
 Profile  
 
SlingShot
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 17:47 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
fzabkar wrote:
Precision Cleaning for Hard Disk Drives:
http://solutions.3m.com/wps/portal/3M/en_WW/3MNovec_LA/Home/Applications/PrecisionCleaning/HardDiskDrives/

Do I need to have an ultra sonic bath to use this or is there some sort of cloth it can be applied to ?
Top
 Profile  
 
fzabkar
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 17:56 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
I would ask "a 3M precision cleaning expert":

http://solutions.3m.com/wps/portal/3M/en_WW/3MNovec/Home/Support/RequestTechnicalAssistance/?page=PrecHardDiskDrives

_________________
A backup a day keeps DR away.
Top
 Profile  
 
pcimage
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 18:08 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
I have made many enquiries into trying to buy Novec from 3M or finding a disti, but no response whatsoever

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
SlingShot
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 18:12 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
fzabkar wrote:
I would ask "a 3M precision cleaning expert":

http://solutions.3m.com/wps/portal/3M/en_WW/3MNovec/Home/Support/RequestTechnicalAssistance/?page=PrecHardDiskDrives


Will have to work out how to find the English version of that Russian page first.

Another forum is telling me to use Ethanol.
Top
 Profile  
 
SlingShot
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 18:14 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
pcimage wrote:
I have made many enquiries into trying to buy Novec from 3M or finding a disti, but no response whatsoever

Sean are you back ?
Top
 Profile  
 
fzabkar
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 18:32 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
http://multimedia.3m.com/mws/media/104172O/3mtm-novectm-71da-engineered-fluid.pdf

Quote:
3M™ Novec™ 71DA Engineered Fluid is a hydrofluoroether, Methyl Nonafluorobutyl Ether (C4F9OCH3), in an azeotrope formulation with trans-1,2-dichloroethylene (t-DCE) and ethanol.

The ethanol component of Novec 71DA fluid provides enhanced removal of ionic contaminants.

Cleaning of oils, greases, waxes, handling oils and solder flux residue

_________________
A backup a day keeps DR away.
Top
 Profile  
 
LarrySabo
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 20:35 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
SlingShot wrote:
I tried to clean a finger print from a platter using isopropyl but it leaves residue when evaporated.

What was the purity of the IPA and was it fresh or had it been used before and sitting around a while? I'd try again using fresh 99.9% IPA and a cleanroom wipe. IPA is very hydroscopic and absorbs moisture from the atmosphere; the water content may be responsible for the smears.

_________________
Sabo Computer Repairs & Data Recovery
Top
 Profile  
 
Blizzard
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: June 30th, 2017, 20:43 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 131
Location: Ellijay, GA
If it's just one fingerprint then I would try to avoid using any chemicals on the platter. You could probably remove the print using a good cleanroom swab (Foamtec, Texwipe). You could use a cleanroom wipe too but be careful, the cheap ones might actually have chemicals on them or they might leave behind microfibers which will end in catastrophic failure. I recommend finger-printing a test drive, cleaning it with the solution you have decided upon, and then test the recovery. If it works, test it again. Once you are happy with your tests then proceed with customer data recovery. Always treat platters as if they are more delicate than you imagine they are, even if you already imagine that they are the most delicate surface :)

_________________
Blizzard Data Recovery
Top
 Profile  
 
pcimage
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: July 2nd, 2017, 6:40 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
SlingShot wrote:
pcimage wrote:
I have made many enquiries into trying to buy Novec from 3M or finding a disti, but no response whatsoever

Sean are you back ?


Yep!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
scratchy
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: July 2nd, 2017, 15:08 
Offline
User avatar

Joined: August 9th, 2007, 8:40
Posts: 791
Location: United Kingdom
pcimage wrote:
I have made many enquiries into trying to buy Novec from 3M or finding a disti, but no response whatsoever

I got a response but they sell to wholesalers. With minimum order quantities. I asked for wholesaler list and I am still waiting. At leat 3 years. I think it's also known as hard disk spray :D

_________________
If you can keep your head when all about you are losing theirs, you probably don't fully understand the situation. ... Mr Kipling

https://www.mjm.co.uk/
Top
 Profile  
 
fzabkar
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: July 2nd, 2017, 18:50 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16960
Location: Australia
http://www.besttechnologyinc.com/precision-cleaning-chemistries/3m-novec-engineered-fluids-solvents/

Quote:
Here are a few examples of the 3M Novec line of chemistries Best Technology stocks:

3MTM NovecTM Engineered Fluids / Cleaners for Cleaning and Vapor Degreasing

3MTM NovecTM 7100 Engineered Fluid
3MTM NovecTM 7200 Engineered Fluid
3MTM NovecTM 71IPA Engineered Fluid
3MTM NovecTM 71DE Engineered Fluid
3MTM NovecTM 71DA Engineered Fluid
3MTM NovecTM 72DA Engineered Fluid
3MTM NovecTM 72DE Engineered Fluid
3MTM NovecTM 73DE Engineered Fluid

_________________
A backup a day keeps DR away.
Top
 Profile  
 
SlingShot
 Post subject: Re: Best way to clean a platter of finger print
PostPosted: July 2nd, 2017, 18:55 
Offline

Joined: March 6th, 2017, 15:27
Posts: 55
Location: United Kingdom
pcimage wrote:
SlingShot wrote:
pcimage wrote:
I have made many enquiries into trying to buy Novec from 3M or finding a disti, but no response whatsoever

Sean are you back ?


Yep!

Cool, be in touch in the morning m8
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 16 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: michael chiklis and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group