MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
MindMergepk
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 18th, 2017, 8:55 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 848
Location: Pakistan
Patient is:
Model: ST500DM002-1BD142
SN: Z3TKNZEY
PCB SN: 0000C344C556
DATE: 05-05-2013

Donor is:
Model: ST500DM002-1BD142
SN: Z3TC8SCM
PCB SN: 0000732365V1
DATE: 13-12-2012

try the attached rom, with donor heads in patient drive, it might help.


Attachments:
patch-rom.zip [214.59 KiB]
Downloaded 486 times

_________________
Data Recovery Pakistan
Top
 Profile  
 
fzabkar
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 18th, 2017, 16:41 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 17326
Location: Australia
cheadledatarecovery wrote:
Just spotted the 'word-wrap' issue. No idea what has caused that!

J

Quote:
A line with no spaces cannot be wrapped.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
pepe
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 21st, 2017, 12:34 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4848
Location: Hungary
now the question is what's on the sticker...
please, could we sort this out within then next 10 posts? :)

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 22nd, 2017, 1:02 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
pepe wrote:
now the question is what's on the sticker...
please, could we sort this out within then next 10 posts? :)

pepe


:mrgreen:
Seriously Pepe Sir :lol:

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
agent007
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 22nd, 2017, 1:39 
Offline

Joined: July 17th, 2017, 2:32
Posts: 27
Location: Singapore
Patient heads in donor drive have failed ==> likely degraded head.

The highlighted in red Servo response/recovery messages are likely due to the degraded head unable to perform the power up initialization at the system area. Since HSA-swapped having the same error message and it could be means that the system area has been damage/scratch due to the HDI "Head-Disk Interference" effect, could be a light scratches along the SA.

I'm not sure if your current tools able to measure the resistance of the MR heads? If yes, it's worth to try out to further confirmed the head degradation on the patient drive.

cheadledatarecovery wrote:
Donor – Match on all of above.
Similar symptoms as per: http://forum.acelaboratory.com/viewtopic.php?t=8273

Disk stays spinning. Terminal output below.

Work so far:
• Tested patient with donor PCB, no change.
• Attempted shorting read-channel with patient heads inside. Cannot get to T> . When shorting at the ‘correct’ time, drive spins down after a number of clicks, but will still will not provide T> .
• Opened HDD, inspected heads under microscope – no visible damage. In the HDA there are small signs of contamination, hard to see silver coloured fragments (Yes, not good I know!)
• Use of donor heads in patient provide the same results. After swapping donor heads back into donor they still work OK.
• Patient heads in donor drive do not work – they have failed.

If there was significant damage to the platter I would have expected the donor heads to have degraded, and not be functional once they were swapped back into the donor. However, the tiny amounts of silver coloured fragments would suggest some media damage, perhaps to SA? More likely than not media damage on this disks, but trying to exhaust all possibilities.

Any suggestions are welcome on this one.
Thanks,
John

Terminal output:

Boot 0x10M
Spin Up
RECOV Servo Op=0100 Resp=0005[0x00000000]
RECOV Servo Op=0055 Resp=0005[0x00000000]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0020 0000 0000 0000 0F98 0000 0000 0000 0000 0000 0000 0000 000Ax
RECOV Servo Op=0155 Resp=0005[0x00025CB4][0x00025CB4]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0020 0000 0000 0000 0F98 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x
RECOV Servo Op=0055 Resp=0005[0x0000B319]
RECOV Servo Op=0055 Resp=0005[0x0000B319]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0155 Resp=0007
ResponseFrame 0000 0000 0000 0000 0020 0000 0000 0000 0F98 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0055 Resp=0005x
RECOV Servo Op=0155 Resp=0005[0x00030FCD][0x00030FCD]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0020 0000 0000 0000 0F98 0000 0000 0000 0000 0000 0000 0000 000A
RECOV Servo Op=0155 Resp=0005x
Top
 Profile  
 
dodoz
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 22nd, 2017, 5:03 
Offline

Joined: September 12th, 2012, 14:17
Posts: 6
Location: europe
This disks has differents preamp .
Donor PREAMP_ID : 0459
Patient PREAMP_ID : 0373.
Try use other donor.
Top
 Profile  
 
pepe
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 22nd, 2017, 5:29 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4848
Location: Hungary
Quote:
Donor PREAMP_ID : 0459
Patient PREAMP_ID : 0373.


good point, that can be a problem too. So transfering adaptives might help as well.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Amarbir[CDR-Labs]
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 22nd, 2017, 13:17 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
Well,
So many drives will many different heads this could be but is not mandatory

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com
Top
 Profile  
 
MindMergepk
 Post subject: Re: ST500DM002 - media damage?
PostPosted: July 23rd, 2017, 4:53 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 848
Location: Pakistan
pepe wrote:
Quote:
Donor PREAMP_ID : 0459
Patient PREAMP_ID : 0373.


good point, that can be a problem too. So transfering adaptives might help as well.

pepe


i send you a PM, please respond to it.

thanks

_________________
Data Recovery Pakistan
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 29 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group