I have a strange issue with an F3. Usual goes BSY issue with any SATA commands but...
- Terminal gives a readout (see below) but cannot get terminal access either by keyboard or shorting.
- Funny thing is if the drive goes BSY, you need to repower the drive 3 times before the drive will spin again.
- Changed PCB but same issue.
- Does have 'RECOV Servo Op=0100 Resp=0005' once at start so could be a head issue.
- Might the issue with having to power on the drive 3 times for it to spin mean a ROM or Preamp issue?
Code:
Boot 0x80M
Spin Up
RECOV Servo Op=0100 Resp=0005
0100 0000 0000 0001 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 4A75 004C 05BC 700B 0008 0000 0000 0000 0FCB 00E8 0000 7200 0000 0000 0000 0000 0000 0000 256C 0D81 5A59 0000 FFFE D5E2 FFFF ABCD ABCD FF8B 0000 0001 1114 0000 0003
Trans.
Rst 0x80M
Spin Up
SpinOK
TCC:001F
Humidity:29.3%
(P) SATA Reset
Last Saved GlobalHeader EraseInProgress:00 DiscDataValid:00
NVC Power Loss Host Sig:FFFFFFFF
NVC Debug Log: FFFFFFFF FF FF FFFF FFFFFFFF
PP: FFFFFFFF FFFFFFFF FFFF
TW: FFFFFFFF FFFFFFFF FFFF
GC: FFFFFFFF FFFFFFFF FFFF
ENP0x00AB
New GlobalHeader EraseInProgress:00 DiscDataValid:00
NVCClearingEraseInProgress:00
NVCOkToWrite:07
NVCClientDisabled:00
DumpNVC
MC051: MainPOR: EXCEPTION: Corrupt PRI copy of MCMT
MC052: MainPOR: EXCEPTION: Corrupt SEC copy of MCMT
MCMainPOR: Start:
Media Cache Data Base 02468748B0
Check MCMT Version: Current
MCMainPOR: MediaCacheDiscStateFlags 00000002 MCStateFlags 006051C3
MC058: MainPOR: EXCEPTION: POR Failed General Tms 00000000 00000000 00000036
MC063: MainPOR: Feature Disabled...
6Gb Max Speed lowered to 3Gb for Intel bug
Send Status: COMRESET seen
[SR] 00000000 - 00000000
[BRO - 0009] 00000000 - 00001D5A
_________________
HDD, SSD, Flash and RAID Data RecoveryFounder of The Data Recovery Professionals Group