jermy wrote:
you kidding ? right ?
http://bfy.tw/HCabWell, I guess I must be that stupid, thank you for pointing that out jermy, but I'd appreciate a helpful explanation if someone would care to do so.
In other words, when I see, say a screen shot of a PC-3000 interface, it shows an actual 4 digit number that can be used to compare MRJog values. I know right away that it falls within the threshold or not. A value listed at "1845" is within the target of "100" of a donor head listed at "1880". I simply don't know how to interpret a value like 1A09 yet. I guess I need that very basic lesson.
fzabkar wrote:
jermy wrote:
you kidding ? right ?
http://bfy.tw/HCabI believe that the correct microjog values in that example are 0x091A and 0x0912. The remaining 4 heads are not present -> 0x0B00.
Thanks fzabkar. So I see that the remaining 4 heads are not present due to values there, but I don't yet see how you interpret Head 0 at 1A09 to be 0x091A, or Head 1 at 1209 to be 0x0912. And even then, how you would determine if the donor head was within range, since the desired range is, let's say "100". I must be missing something really obvious I guess.